High Impact Factor : 4.396 icon | Submit Manuscript Online icon |

Optimization Of Machining Parameters In CNC Turning Using Firefly Algorithm

Author(s):

Dr. S. Bharathi Raja , Indra Ganesan College of Engineering; C. Prem Kumar, Parisutham Institute of Technology & Science; G. Gokul Rajasekar, Parisutham Institute of Technology & Science; R. P. Dinesh Prasad, Parisutham Institute of Technology & Science

Keywords:

CNC Machine

Abstract

now a day’s machining is done through various automated machines. One of the widely used machines is CNC. Even though the automated machines are used, the quality of the work is determined by parameters used. The cutting parameters of the CNC machine determine the productivity, surface finish, machining time and other qualities of the product. This study involves the optimization of those cutting parameters. In order to get optimized CNC parameters for a specific tool-work combination, Firefly Algorithm (FA) is used to compute the best parameters based on the experiments conducted on a CNC Turning center. The three cutting parameters are cutting speed (V), feed (f), and depth of cut (d). The practical constraints have been considered during both practical and experimental approaches. The result reveals that FA is very well suited in solving parameters selection problems.

Other Details

Paper ID: IJSRDV2I1020
Published in: Volume : 2, Issue : 1
Publication Date: 01/03/2014
Page(s): 56-61

Article Preview

Download Article