High Impact Factor : 4.396 icon | Submit Manuscript Online icon |

Design and Fabricated the 90 degree Hybrid Power Divider for 4X4 Multiport Amplifier


Nikunjbhai V. Prajapati , LJIET, Ahmedabad; A. K. Sisodia, LJIET, Ahmedabad


4 Way 90 degree Hybrid power divider,ADS software, Optimization design, Network analyzer, Signal generator.


This paper presents the design and fabricated of 2.5 GHz 900 Hybrid power divider for 4X4 multiport amplifier. The multiport amplifier is an advanced technique which providesthe flexibility of channel capacity per beam in a multi beam system. It is also used the implementation of the mobile base station for shearing the power in each transmission path. Most of the multiport amplifiers use butler matrix using the 900 hybrid power divider(4X4). The output amplitude and phase shift of the 900 hybrid power divider are critical parameters for achieving the optimum performance of the MPA.The key point is analysis of 2.5 GHz 900 Hybrid power divider(4X4) for better power on the multiport amplifier.Hence a four way power divider for MPA for base station has been design, simulated and fabricated using the Advance design system software 2011.We have seen the good return loss and insertion loss in fabricated power divider using the network analyzer and signal generator.

Other Details

Paper ID: IJSRDV2I3648
Published in: Volume : 2, Issue : 3
Publication Date: 01/06/2014
Page(s): 1185-1187

Article Preview

Download Article