High Impact Factor : 4.396 icon | Submit Manuscript Online icon |

Experimental Investigation on Effect of Parameters in Ultrasonic Plastic Welding of Hips (High Impact Polystyrene)


Brijesh N. Patel , U. V. Patel College of Engineering, Ganpat University, Kherva, Gujarat.; Prof. Chirag. P. Patel, U. V. Patel College of Engineering, Ganpat University, Kherva, Gujarat.


Amplitude, Pressure and Thickness ratio, ANOVA.


Ultrasonic plastic welding has received significant attention in the past few years, and has become more reliable and suitable for a wide range of applications. The fundamental aspect of this study is the design of an integrated welding horn. In this experiment the conical horn is use. Design of conical horn is created in the CARD software. High precision is required in the design of the components and in particular the welding horn. Because the horn is responsible for transferring energy to the welding zone and the main objectives of this study investigate and evaluate the effect of different ultrasonic welding parameters (amplitude, pressure and thickness ratio) on welding tensile strength of HIPS. A suitable experimental design based on full factorial design and executed for conducting trials. These designs have a greatly simplified analysis. The results are analyzed using analysis of variance (ANOVA) method. This parametric analysis (ANOVA) shows the percentage contribution of parameters individually. (Amplitude, Pressure and Thickness ratio)

Other Details

Paper ID: IJSRDV2I5336
Published in: Volume : 2, Issue : 5
Publication Date: 01/08/2014
Page(s): 838-841

Article Preview

Download Article