Design and Development of Graphical HMI Panel with Modbus Communication for Interfacing with Various AC Drives |
Author(s): |
Patel Vaibhavi V. , B.H.Gardi College of Engineering and Technology |
Keywords: |
A.C Drives all parameter test, DSP PIC controller use, A.C Drives all parameter are testing and monitoring |
Abstract |
AC drive widely used to control the speed of AC motor. For demanding applications like crane (hoist), conveyor, stacker, centrifuge, etc. In certain cases where AC drive regenerate energy due to this DC link capacitor voltage exceed to the specified level very rapidly because of small capacitor value. A researcher shows the Supervisory Control on drives is implemented using a Programmable logic Controller (PLC) to monitor and control drive performance. This Project focus on Design of Graphical Human Machine Interface (HMI) FOR Real Time Monitoring and Controlling Operation of AC Drive especially for Graphic Analysis of drive parameter such as frequency, torque, speed, temperature, etc. The design is basically divided in two section which one is HMI controller section and second is AC Drive controller section which communication using Modbus protocol. HMI section includes 128x64 Dot Matrix LCD and dsPIC33EP512MC206/506 Series controller. AC Drives controller section includes TMS320F28069 DSP controller to control switching frequency of IGBT. The control of the DC link capacitor voltage during regeneration that can be done by DSP. This AC Drives also includes Built-in PLC control that can be programmed by HMI. The whole Development will be carried on Embedded System. |
Other Details |
Paper ID: IJSRDV3I40170 Published in: Volume : 3, Issue : 4 Publication Date: 01/07/2015 Page(s): 290-295 |
Article Preview |
|
|