HIGH IMPACT FACTOR - 2.39

Investigation of impact of Fly Ash as a Filler in bituminous Mix- An overview

Author(s):

Shakti Kumar , Madan Mohan Malviya University Of Technology

Keywords:

Aggregate, Optimum bitumen content, Optimum fly ash content

Abstract

In bituminous paving mixture, normally cement and stone dust are utilized as filler material. For comparison, cement used to prepare control mix. Marshall Stability test is employed to find stability, flow value, % air voids, (VMA) voids in mineral aggregate and (VFB) voids filled with bitumen properties for a bituminous paving mixture. The work is carried out by using specifications as per MORTH (Ministry of road transports & highways, specifications for road & bridge works, 5th revision). By replacing the cement with fly ash at the levels 25%, 50%, 75%, 100% the results are compared. The difference of properties like optimum bitumen contents and optimum fly ash contents are determined. It has been recommended to use of fly ash, not only reducing the cost of execution, also solve utilization of fly ash and its disposal problems.

Other Details

Paper ID: IJSRDV4I30216
Published in: Volume : 4, Issue : 3
Publication Date: 01/06/2016
Page(s): 302-304

Article Preview

Download Article