HIGH IMPACT FACTOR - 2.39

Use of Iron Slag in Paver Block

Author(s):

Abhishek Kumar , Madan Mohan Malaviya University of Technology, Gorakhpur

Keywords:

Coarse Aggregate, Fine Aggregate, OPC 43 Grade Cement, Iron Slag, Compressive Strength, Flexural Strength, Paver Block

Abstract

In these days the make use of concrete Paver Block in road pavement is broadly used. Such a moment concrete Paver Block is improved option in road building as compared to the conservative road which is complete by bitumen with gravel in a cost vision of point and better fitness. India is a increasing country so at this time the construction of road and building plays an important position. At the present days nearly all of the work related with construction or roadway is complete by cement concrete design mix. In this theory I have design paver block by with Cement Concrete mixture of Design Mix M20 which is complete of 10mm Coarse Aggregate, OPC 43 Grade Cement with Fine Aggregate and paver block is of measurement 200 x 160 x 80 mm. In this procedure use the partial substitute of Cement by Iron Slag in percentage of 0%, 5%, 10%, 15%, 20%, 25%,30%And 40% respectively and also, supplementary Gypsum constantly 2% by mass of cement in total mix of Cement Concrete. Super plasticizer is use as an admixture which is added 2% by weight of cement constantly in the production of concrete combination. The purpose of this admixture is in the direction of reduce the water cement ratio. The Paver Block curing procedure is done for 28 days respectively to discover its compressive strength. The main point of this thesis is to make use of waste products similar to Iron Slag for the making of Paver Block which will of use in construction.

Other Details

Paper ID: IJSRDV4I30350
Published in: Volume : 4, Issue : 3
Publication Date: 01/06/2016
Page(s): 328-331

Article Preview

Download Article