High Impact Factor : 4.396 icon | Submit Manuscript Online icon |

Improvement in Wear and Friction Properties of Polyphenylene-Sulphide Composite with 30% Carbon Fiber


Walzade Snehal R. , JCOE, Kuran, tale:- Junnar (410511); Galhe D. S., JCOE, Kuran


Carbon Fibre, Polyphenelene Sulphide, Micro- Structures


The Objective of this dissertation work was to study the effect of filler material on Mechanical Properties of polyphenelene sulphide Composites. For this purpose, carbon fibre filler materials were selected based on their end applications. The fillers used are carbon fibre. The composition selected was PPS + 30% Carbon Fiber Fillers. The mechanical test was carried out on pin on disc apparatus Tribometer. The friction and wear Test gave the results for frictional force, coefficient of friction and wear. The results indicated that carbon Filled Composites showed best results for friction and wear whereas frictional force, coefficient of friction and wear results were good for Carbon filled ones. The specimens were tested during three intervals of time i.e. 15, 30 & 45 minutes. The results concluded that carbon filled composites showed greater strength. Micro-structure Analysis was carried out after manufacturing the specimen.

Other Details

Paper ID: IJSRDV4I50310
Published in: Volume : 4, Issue : 5
Publication Date: 01/08/2016
Page(s): 746-748

Article Preview

Download Article