High Impact Factor : 4.396 icon | Submit Manuscript Online icon |

Design and Fabrication of Roller Guide Alternating Mechanism with the Help of Toggle Jack

Author(s):

Ameya Mulay , Sanghavi College of Engineering Nashik; Ameya A. Mulay, Sanghavi College of Engineering Nashik; Ankush K. Gaikar, Sanghavi College of Engineering Nashik; Shrikant S. Gangawane, Sanghavi College of Engineering Nashik; Laxman N. Fadol, Sanghavi College of Engineering Nashik

Keywords:

Thyssenkrupp, TADL, Scratches, Simple Mechanism, Toggle Jack

Abstract

Our project Roller Guide Alternating Mechanism is sponsored by “ThyssenKrupp Electric Steel India PVT”. The company is known for their processed steel for electrical component. In addition to the steel production, Thyssenkrupp's products range from industrial services and machines, elevators and shipbuilding. A branch of Thyssenkrupp Marine Systems also manufactures frigates, corvettes and submarines for the German and foreign navies. Our project is related to the Tandem Annealing and Decarburizing Line (TADL).In cooling region the very first support roller is near to the heating zone and gets affected by the heating. Because of heat the roller bearings gets jam which causes scratches on the processed sheet. This roller assembly needs to be changed after interval of 1 month regularly. Is take time about 45-60 minutes. Due to this delay the company bears the loss of 1.5 lakhs monthly. For this we design a simple mechanism which will help to change the roller without stoppage of production link. So we decided to design a mechanism similar to the toggle jack which helps to reduce the scrap and the damage over the processed product, which will help to increase the production rate.

Other Details

Paper ID: IJSRDV6I110019
Published in: Volume : 6, Issue : 11
Publication Date: 01/11/2019
Page(s): 357-361

Article Preview

Download Article