High Impact Factor : 4.396 icon | Submit Manuscript Online icon |

Review on Welding Fixture


Ketan Palaskar , G .H. Raisoni College of Engineering,chas,Ahmednagar; Kiran Patole, G .H. Raisoni College of Engineering,chas,Ahmednagar; Vaibhav Palaskar, G .H. Raisoni College of Engineering,chas,Ahmednagar; Amol Sabale, G .H. Raisoni College of Engineering,chas,Ahmednagar; Prof. R. Kalase, G .H. Raisoni College of Engineering,chas,Ahmednagar


Jig, Fixture, Weld Ability, Sensitization, Fusion, Stamping Plate, Stator Core


Fixture is used for locating, holding and supporting a work piece machining like welding of stator case frames. Fixture reduces material handling time and increase the productivity. It is required to modify the old fixture for the machining of the different stator case frames of different sizes. This old fixture is time consuming process and requires more material handling. It will leads to the problem of misalignment & inaccuracy. And also there is no provision for avoiding the misalignment & inaccuracy in operation. Inaccuracy will increase the rejection of frames. If it is need to rework the rejected frames, then it becomes essential to design the special purpose machine. This new machine will increases the machining cost of stator case frames. So this fixture useful for machining more than one stator case frames with less work setup time & reduced material handling also. The fixture consists of different spigots which are provided on spigot plate to accommodate different stator case frames. Thus there is no need to change the fixture for every stator case frame of different size. As the single fixture is used for different stator case frames, the manufacturing cost of fixture is reduced. The productivity is increased and required manpower for manufacturing is reduced.

Other Details

Paper ID: IJSRDV6I22014
Published in: Volume : 6, Issue : 2
Publication Date: 01/05/2018
Page(s): 3573-3575

Article Preview

Download Article