Design and Modification by Change in Geometry of Nozzle Tip |
Author(s): |
| Ayoniza Raghubinayam , Bhagwan Mahavir College of Engineering and Technology, Surat; Prakash Singh, Bhagwan Mahavir College of Engineering and Technology, Surat; Chetanya Sharma, Bhagwan Mahavir College of Engineering and Technology, Surat; Narendra Dalia, Bhagwan Mahavir College of Engineering and Technology, Surat |
Keywords: |
| Geometry, Nozzle Tip |
Abstract |
|
This experiment is in concern to get optimum jet force and efficiency from different cross-sectional nozzles. The experiment has been performed on nozzles with different cross-sections. But the point that is key for this experiment is we have taken different tip shapes of nozzles but same cross-sectional areas and also flow rate. Rectangular, circular, elliptical, square, triangular are the cross-sections chosen to perform this experiment. The edges of the nozzle tips are hemispherical finished to avoid losses, due to irregular edges. Also key point for this hemispheric edge finish is to protect the edges of nozzles from if any sudden high flow passes from the tip as because we have taken the nozzles with same conversion but they differs from their tip cross-sections. The conversion is as made such that it converse from 20mm to 14mm in span of 50mm length. |
Other Details |
|
Paper ID: IJSRDV8I40687 Published in: Volume : 8, Issue : 4 Publication Date: 01/07/2020 Page(s): 350-353 |
Article Preview |
|
|
|
|
