No. |
Title and Author |
Area |
Country |
Page |
51 |
Frequency Control of Microgrid under Islanded Conditions Using Fuzzy Logic Based On Pi Controller
-Rupinder Kaur ; Manpreet Kaur
This paper presents fuzzy-PI based controller for frequency control of microgrid under islanded condition. In islanded mode the entire control is regulated by the microgrid controller. Any difference between generation and demand causes frequency to deviate from nominal value which effects the microgrid operation and reliability of power flow. For evaluating the performance of controller, a microgrid is considered consisting of PV system, wind turbine generator set, diesel generator set along with storage units. The proposed control scheme is compared with autotuned PI control scheme. The results for both the control schemes are presented and comparison is made between them. The developed model is simulated in Matlab/Simulink environment. Read More...
|
Electrical Engineering |
India |
232-237 |
52 |
A Survey on User Association and Resource Allocation in Noma and Fog Computing Network
-Meekha Hanna Sam ; Winny Elizabeth Philip
Heterogeneous ultra-dense networks (HUDNs) furthermore, non-orthogonal multiple access (NOMA) have been distinguished as two proposing procedures for 5G versatile correspondence frameworks due to their incredible abilities to upgrade range proficiency. This article examines the utilization of NOMA procedures in HUDNs to help monstrous network in 5G frameworks. Specifically, a bound together NOMA system is proposed, including power-area NOMA and code-area NOMA, which can be designed deftly to serve diverse application situations. As a further development, brought together NOMA system empowered HUDNs are additionally researched, with specific spotlight on client affiliation and asset distribution. Two contextual investigations are given for exhibiting the viability of brought together NOMA empowered HUDNs. At long last, some primary challenges and promising examination bearings in NOMA empowered HUDNs are recognized. Lately, with the eruptive prevalence of versatile Internet and the development of different new IoT applications, fog processing is proposed to move the distributed computing administrations towards the edge, compensating for its absence of versatility backing and high postponement. Haze registering is altered for situations with scant assets and eccentric conditions, however there is no client driven joint improvement mist registering models intended for such situations. In this paper, we expect to boost the client experience also, in general framework execution by together improving client affiliation and asset allotment in the situations referenced above, which can be planned as a blend number non-straight programming issue. This paper deals with the survey on user association and resource allocation on two streams. Read More...
|
Electronics & Communication Engineering |
India |
238-241 |
53 |
Artificial Intelligence Based Aerial Surveillance for Smart City
-Vishal Nagar ; Priyam Bhatt; Smitkumar Patel
The proposed system has been developed with the aim of minimum human intervention and an ability for smart decision making using latest technologies like artificial intelligence. The system mainly consists of an Aerial Object, which will be flying across the city, keeping an eye beneath. A High definition Camera attached to the Aerial Object will be capturing different areas of the cities. These images will be streamline with the Cloud Server, which is capable of detecting garbage pileups, potholes, pollution near river sides, encroachment, traffic congestions and even accidents. The project is cost-effective, which can be utilized not only by smart cities but also by small towns. Read More...
|
Computer Engineering |
India |
242-243 |
54 |
Covid Companion
-Priyam Arora ; Deepak Kumar Sain; Shubham Goel; Aakash Gupta
The outbreak of Coronavirus disease (COVID-19), caused by severe acute respiratory syndrome (SARS) coronavirus 2 (SARS-CoV-2), has thus far killed over 1,30,000 people and infected over 56,000,000 in the world, resulting in catastrophe for humans. In retort to the swiftly growing cases of COVID-19 affected people and misperception among everyone, we have decided to make such a submission that delivers all the essential resources that might need in such challenging times. This application provides all the necessary information and assembles all the different needs under a single platform. Read More...
|
Information Technology |
India |
244-246 |
55 |
A Study on Load Balancing Techniques in Cloud Computing Environment
-Hirenkumar Parmar ; Akshar Patel
Cloud computing is turning into the most developed and well-known innovation giving the world improved strategies for storage, the viability of the common resources like storage, computation power, dynamic allotment of resources based on the customer'
s interest. Using the cloud service shares information and give different preferences for clients. With Tremendous increment in the clients and their interest in various administrations on the cloud computing stage, productive or effective use of assets in the cloud climate turned into a basic concern. This developing innovation has a bunch of difficulties to share the resources, increment the accessibility and keep up the load between the resources. Cloud load balancing is one of the principal challenges which will disperse the dynamic workloads at hand and processing resources in the cloud environment between the resources uniformly. Load balancing is holding an essential function in keeping up the cadence of Cloud computing. The evaluation metrics of load balancing algorithms in the cloud are response time and waiting time to the client's request. In this paper, we review variegated existing load balancing algorithms. Read More...
|
Computer Engineering |
India |
247-251 |
56 |
Artificial Intelligence in the Field Of Physical Education and Sports
-Dr. Kishore Mukhopadhyay
The application of artificial intelligence (AI) opens an interesting perspective for predicting injury risk and performance in team sports. A better understanding of the techniques of AI employed and of the sports that are using AI is clearly warranted. The purpose of this study is to identify which AI approaches have been applied to investigate sport performance and injury risk and to find out which AI techniques sport has been using. The AI application coming up with the way to combat the new game play or is it the coach and players? Do the fans know or even care who comes up with it as long as the game is exciting? Boards of sporting codes and teams need to have the appropriate governance arrangements in place to manage the introduction and use of AI into their industry, including strict compliance to any guidance set by the governing bodies to ensure and maintain fair competition amongst teams.The Study discussed the various aspects of AI and techonology innovations in the field of physical education and sports in Particular. Read More...
|
Science Education |
India |
252-257 |
57 |
An Empirical Investigation of Socio-Economic Parameters Associated With Rape Crime in Karnataka Using Regression Analysis
-Rashad Mohamed Khan ; Ravva Venkata Subba Aravind; Shashank Prakash Patil
Crime is a socially harmful act that brings disgrace to society. The crime rate in India has always been on the rise. Due to the increase in population in the state of Karnataka, the crime rate has escalated. Rape is a heinous crime that has plagued society. It is a dastardly crime and highly deplorable and unacceptable. It poses a challenge and is a worrying factor for the Government. The purpose of the paper is to conduct an empirical investigation of the relationship between various economic and demographic factors associated with rape. Regression analysis is carried out to understand the co-relation of various social factors and identify significant variables to curb crime effectively. Read More...
|
Computer Science and Engineering |
India |
258-261 |
58 |
Study of Chatter Vibration Analysys in the Machining Operation and Control Methods
-Rahul Bapu Aadlinge ; Dr. P.A.Makasare
Chatter effect as a self-excited vibration in machine tools contributes to undesired surface finish of the work piece, and can deteriorate the surface quality. Machine tool chatter is one of the major constraints that limit productivity of the turning process. It is a self-excited vibration that is mainly caused by the interaction between the machine-tool/work piece structure and the cutting process dynamics. The frictional and impact chatter are mainly due to the nonlinearity of the dry friction and the intermittent contact between the cutting tool and the work piece. Chatter becomes even more critical when machining materials that are difficult to cut. The productivity of expensive machining systems is often limited by chatter. It has defined chatter as self-generative vibrations that occur when the chip width is too great versus dynamic stiffness. This phenomenon leads to a bad surface aspect and high noise level. As it reduces tool life, it increases production costs. By using various methods we can avoid the chatter vibration. Read More...
|
Design |
India |
262-264 |
59 |
Social Responsibility of Corporate and Its Performance in SECL: A Relative Study
-Kameshwar Pandey ; Dr. Rajiv Harris Peters
There is no association with CSR exercises and the center business of SECL. With the quickly changing professional workplace, more useful self-rule, operational opportunity and so forth SECL has embraced CSR as a vital device for feasible development of society as a whole .Based on the abovementioned, it very well might be said that SECL is focused on making an impact on the social and ecological boundaries applicable to its tasks. Nonetheless, there are gigantic opportunities for invigorating SECL group through contribution of the laborers in CSR exercises. This can support both, the social advancement boundaries while improving the laborer efficiency through expansion in inspiration level. Read More...
|
Managment |
India |
265-267 |
60 |
A Survey Paper on- Effect of High temperature in Reinforced Cement Concrete Structure
-Sanjay Kumar Yadav ; Prof. Kamini Laheriya
This topic also gives a comprehensive knowledge on the overall strategy for the restoration of fire damaged buildings and also presents a critical appraisal of the assessment procedures by different nondestructive techniques, specifications and execution of repair techniques. The experimentation has been done to find out the impact of the fire on reinforcement steel bars by heating the bars to 100°,300°,600°,900° centigrade of 6 samples each. The heated samples are rapidly cooled by quenching in water and normally by air cooling. The change in the mechanical properties are studied using universal testing machine (UTM). The general conclusion is that majority of fire damaged RCC structures are repairable. But the impact of elevated temperature above 900°C on the reinforcement bars was observed that there is significant reduction in ductility when rapidly cooled by quenching. In the same case when cooled in normal atmospheric conditions the impact of temperature on ductility is not high. By heating the reinforcement bars, the mechanical properties can be changed without varying the chemical composition. Read More...
|
Civil Engineering |
India |
268-271 |
61 |
A Work Paper on- Effect of High Temperature in Reinforced Cement Concrete Structure
-Sanjay Kumar Yadav ; Prof. Kamini Laheriya
With the increased incidents of major fires in buildings; assessment, repairs and rehabilitation of fire damaged structures has become a topical interest. This is a specialized field involves expertise in many areas like concrete technology, material science and testing, structural engineering, repair materials and techniques etc. Research and developmental efforts are being carried out in this area and other related disciplines. In this topic the experience of real life problems are presented which add immense value to this. This topic also gives a comprehensive knowledge on the overall strategy for the restoration of fire damaged buildings and also presents a critical appraisal of the assessment procedures by different nondestructive techniques, specifications and execution of repair techniques. The experimentation has been done to find out the impact of the fire on reinforcement steel bars by heating the bars to 100°,300°,600°,900° centigrade of 6 samples each. The heated samples are rapidly cooled by quenching in water and normally by air cooling. The change in the mechanical properties are studied using universal testing machine (UTM). The general conclusion is that majority of fire damaged RCC structures are repairable. But the impact of elevated temperature above 900°C on the reinforcement bars was observed that there is significant reduction in ductility when rapidly cooled by quenching. In the same case when cooled in normal atmospheric conditions the impact of temperature on ductility is not high. By heating the reinforcement bars, the mechanical properties can be changed without varying the chemical composition. Read More...
|
Civil Engineering |
India |
272-275 |
62 |
Onboard Telematics for Automobile: A Blessing in Disguise
-Arjun Reddy ; Dr.A.Rengarajan
The modern telematics methods have a great deal of applications in teleservices and the impact on the engineering methods and applications is very huge. Telematics is a field which cartels together the telecommunications and vehicular technologies which mainly highlight on road safety, road transportation, and how it can be amalgamated with computer science. It is the technology of that is used to control remote objects such as automobiles by sending, receiving and storing information by using the telecommunication devices. The paper is done to analyze the possibilities of telematics to understand the performance of the fleet which in turn leads to the fuel efficiency tracking, fault code information for fleet health and also the behaviors of the driver for better safety management, using telematics in vehicles so that the organizations can access the critical data such as the GPS location, the movement made by the vehicle which can be seen in the accelerograph, and the data related to the engine which can be obtained from vehicle diagnostics data bus. Read More...
|
Master of Computer Applications |
India |
276-280 |
63 |
A Survey Paper on Experimental Analysis of Fly-Ash mix Nano-Silica in Geopolymer Concrete for Economical Behavior of the Structure
-Amir Usmani ; Prof. Kamini Laheriya
This work focuses on studying the effect of fly-ash mix Nano-Silica and their combinations in Geopolymer concrete on compressive strength characteristics of high performance concrete. This work primarily deals with the compressive strength characteristics such as water absorption super plasticizer used in high performance Geopolymer concrete a set of 4 different concrete mixture were cast and tested with different cement replacement levels of Fly-ash with Nano-Silica as Geopolymer concrete addition by wt of Cement and each trial super plasticizer has been added at constant values to achieve a constant range of slump for desired work ability with a constant water-binder (w/b) ratio of 0.30. The materials used to design the mix for M20 & M30 grade of concrete are cement, sand, coarse aggregate, water, Fly-Ash and SiO2 as for Geopolymer concrete. Three specimens are tested for typical category and the mean compressive strength of three specimens is considered as the compressive strength of the specified category of concrete. Read More...
|
Civil Engineering |
India |
281-283 |
64 |
A Work Paper on Experimental Analysis of Fly-Ash mix Nano-Silica in Geopolymer Concrete for Economical Behavior of the Structure
-Amir Usmani ; Prof. Kamini Laheriya
Fresh fly ash-based Nano-Silica in Geopolymer concrete has been able to remain workable up to at least 120 minutes without any sign of setting and without any degradation in the compressive strength. Providing a rest period for fresh in Geopolymer concrete after casting before the start of curing up to five days increased the compressive strength of hardened in Geopolymer concrete. The elastic properties of hardened fly ash-based Nano-Silica in Geopolymer concrete, i,e. the modulus of elasticity, the Poisson’s ratio, and the indirect tensile strength, are similar to those of ordinary Portland cement in Geopolymer concrete. Read More...
|
Civil Engineering |
India |
284-288 |
65 |
TRAFFIC-BEE 1.0
-Sparsh Jindal ; Vibhor Sharma
Indians are estimated to be working 8.1 hours a day, which is mostly higher than any other country in the world. 56 millions suffer from depression while another 34 million are victims of anxiety. While most part of our day is spent on work, it becomes truly important to make travelling a lot more easier. Though the scenario is totally opposite In Bangalore people spend a whopping 470 hours per employee per year on traffic.
Statistics shared by Traffic Logix (www.trafficlogix.com):
ï€ India is only the country in the world that faces more than 15 fatalities and 53 injuries every hour as a result of road crash.
ï€ Traffic collisions are more frequent in any state in India as compared to any international country.
ï€ Over-speeding is one of the main concerns of maximum road rages and accidents which is generally counted as a fault of driver in maximum cases due to his/her lack of attention on the road.
ï€ It is counted that 78% fault is of drivers in maximum cases as compared to other scenarios, leading to road accidents.
.
Fig. 1: describes in detail statistics as produced by Traffic logix.
ï€ Concerns regarding two-wheelers and road deaths by age group:
1) Two wheelers are the deadliest as said according to the Ministry of Road, Transport and Highways of India.
2) The most fatal accidents in 2017 were those of two-wheeler riders accounting for 33% deaths on Indian roads as represented by the below scenario:
Fig. 2: bar chart representation for road deaths as per age-groups for year 2016-India
Fig. 3: Figures for road deaths by age-group as per 2016:
ï€ Approx. 70,000 hit in the age group between 18 and 35 years, comprise maximum from all the age groups as counted.
ï€ Approx 33,600 hit for the age group ranging between 35 and 45 years.
ï€ 5,766 is the count of road deaths which have not yet been compiled into any age group.
ï€ A total of 1,50,800 total death recorded from all age groups in single year of 2016 , sounds worst.
This is a tiny drop of clean water in a big polluted ocean, but its impact will be huge. Hence this is a novel yet feasible solution.
Read More...
|
Information Technology |
India |
289-292 |
66 |
Load Frequency Control of Multi Area Power System with Super Conducting Magnetic Energy Storage
-S.Joshua Daniel ; Dr.M.Karpagam
This paper describes the Load Frequency Control (LFC) of interconnected reheat thermal system using Conventional PI Controller with SMES. The conventional proportional integral controller reduces the settling time error of the system. But it is slow and is less efficient in handling the system non-linearity like Governor Dead Band (GDB) and Generation Rate Constraint (GRC). The purpose of the AGC is to balance the total system generation against system load and losses so that the desired frequency and power interchange with neighboring systems are maintained. The automatic generation control performances have been compared with the conventional proportional integral controller and smes unit for the two-area interconnected power system considering non-linearties. Integral square error (ISE) technique is used to find the optimum integral gain. System performance is examined considering 1% step load perturbation in either area of the system. The simulation results concludes that, smes unit has better dynamic response than conventional controller, i.e. quick in operation, reduced steady state error magnitude and minimized transient frequency oscillation. Read More...
|
Electrical and Electronics Engineering |
India |
293-298 |
67 |
An Advanced Automated Car Driving Using Image Processing
-D. Bharkavi ; R. Vijayashree
When an automobile is on the road, a driver at the guiding haggle is the in-control. Driverless innovation is being created and tried by colleges, foundations, and organizations on every occasion. The possibility of a car without a driver gives us a sentiment of suspicion, and we as a whole will attempt to dodge it. In this paper, we are talking about an independent mechanically took care of the driving vehicle. We are utilizing numerous highlights in our undertaking, for example, planning, following, and neighborhood arranging. We can effectively make a car that can exhibit legitimate path changes, leaving, and U-turns all alone. We are utilizing the various advancements in obstructions and control location strategy, road vehicle tracker, and checking diverse traffic circumstances. This will make a vigorous independent self-propelled car. It will effectively exhibit legitimate stopping portion, path changes, and programmed U-turns. We can do these utilizing the snag and different control location technique, the vehicle tracker. Read More...
|
Image processing |
India |
299-301 |
68 |
IoT Based Home Automation Using Arduino
-P. Swetha ; M. Priya
The Internet of Things (IoT) conceptualizes the idea of remotely connecting and monitoring real-world objects (things) through the internet. When it comes to our house, this concept can be aptly incorporated to make it smarter, safer, and automated. This IoT project focuses on building a smart wireless home security system that sends alerts to the owner using the internet in case of any trespass and raises the alarm optionally. Besides, the same can also be utilized for home automation by using the same set of sensors. A smart home will take advantage of its environment and allow seamless control, whether the user is present or away. With a house that has this advantage, you can know that your home is performing at its best in energy performance. It is possible to explore various engineering challenges by implementing this system, including software programming, PCB design, wifi, TCP/IP protocols, Web Server logic design, and other aspects. This automation system provides excellent insights into the challenges of software and hardware design. Read More...
|
Internet of things (IoT) |
India |
301-305 |
69 |
Design, Planning and Cost Estimation of G+4 Residential Building by using Different Soft wares
-Karan Sudhir Mhatre ; Musuab Muazzam Hamdule; Saurabh Vilas Kamane; Adarsh Ravindra Thakur; Yugandhara R. Galinde
Currently all work is done on computers whether or not it be drawing, estimating, project management etc. in civil engineering field. It helps an engineer to work with high accuracy in less time. This project involves the layout, design, analysis, Schedule planning and cost estimation of a G+4 residential building. For finishing the project very well-known Civil Engineering software’s such as AutoCAD, STAAD Pro V8i, Microsoft Project and Microsoft Excel are used. The floor plan of the G+4 residential building is preliminary based on a plot of size 30m X 15m. The every floor of building have 4 flats having an area of 39,52sq m. Each flat is of 1BHK configuration. The time period of the project using Microsoft project has been calculated to be around 243 days excluding holidays. The total cost of project is Rs 2365055.21 which is calculated in Microsoft excel. Read More...
|
Civil Engineering |
India |
306-312 |
70 |
Advance Autonomous Robot for Multi-Purpose in Office Works
-T.Sathees ; N.Lokeshwaran; M.R.Abhishek; K.Gopinath
Automated guided vehicle plays a significant role to enhancing the material handling technique for last decade year. In this project, the development of multipurpose mobile robot for office work. The AAV is embedded into an intelligent material-handling system with multiple autonomous vehicles. That will provide flexibility and re-configurability of the office. The design AAV system is complex task because it contains the complex design circuits, automated coding technique and selection of specific material properties etc. In particular, the design of AAVs is quite challenging for control system and it can be dramatically affecting the system cost and performance. Ergonomic and safety aspects were also considered in the design of the AAV. A wide-ranging safety system is also employed while designing the AAV with high standard. AGV are mostly used in the industrial application for the material handling application. In this study, the development of AGV mainly used for handling of files from one section to another. Read More...
|
Mechanical Engineering |
India |
313-315 |
71 |
Smart Eye Stick
-Alan Rachel George
Presently there are a huge number of visually impaired people everywhere on the globe. These incorporate individuals from low touring to finish loss of visual. They think that its exceptionally troublesome while going across the street or coming to their particular objective with the assistance of some other person. The traditional stick cannot assist with distinguishing the deterrents in front of the potholes in the way. It is obsolete. Subsequently, there is a need to refresh it utilizing the present innovation .Innovations is developing extremely quickly, which causes individuals to improve and simpler life. The smart eye stick is a strategy to assist blind individuals with perceiving their direction. Blind individuals experience the ill effects of the absence of capacity to do their day by day exercises, from strolling in the road to visiting companions or relative or any day by day things. Outwardly disabled individuals discover troubles recognizing snags before them, during strolling in the road, which makes it risky. The arrangement empowers them to recognize the world around by planning a stick that can help the individual to walk securely without having trepidation of hitting somebody in transit or any strong articles. The smart eye stick is of ease, quick reaction, and lightweight. The stick has been planned to utilize Arduino programming. In this proposed work i have utilized four modules. The ultrasonic sensor has been set before the stick and the other two have been put on sides, left and right. To identify the movement from pretty much every side, it has been utilized bell cautions to alarm the individual if some deterrent is recognized close to him. i have implanted RFID with Servomotor working the opening and shutting of the entryway as one single module in the smart eye stick. And a water sensor, at the point when water is found inside the given reach the sensor identifies it and send notice to the buzzer and a signal alarms the client. Read More...
|
Master of Science (MSc) |
India |
316-319 |
72 |
Artificial Intelligence in Games
-Raj Sudhir Pawar
Artificial Intelligence is a Vast Scientific Field, with tremendous achievements. Interactive Computer Games have been getting rising popularity during recent years, which has artificial intelligence at its base. Some AI is used for collecting data and studying the human brain while they Play Games. Computer VR-games with decent AI are/can help in other fields through a virtual simulation like Flight stimulation, Medical Purpose, Educational Purpose, etc. But Game AI is an effort of going beyond the scripted Interactions for a better experience. The goal of this research is to realistic user experience. Games appear to an excellent platform for various problems related to the challenging field of artificial intelligence. Read More...
|
B.sc IT |
India |
320-322 |
73 |
Analysis of Circular Elevatd Water Tank with Slant Columns Considering Hydrostatic Load: A Review
-Aishwarya Deshmukh ; Rakesh Patel
the research presents literature review on analysis of elevated water tanks subjected to dynamic loading supported on RC framed structure and concrete shaft structure with different capacities and placed in different seismic zones. History of earthquake reveals that it have caused numerous losses to the life of people in its active time, and also post-earthquake time have let people suffer due to damages caused to the public utility services. Either in urban or rural areas elevated water tanks forms integral part of water supply scheme, so its functionality pre and post-earthquake remains equally important. These events showed that importance of supporting system is uncompromising for elevated tank as compared to any other type of tank. Damages caused are the results of unsuitable design of supporting system; wrong selection of supporting system, etc. These structures have heavy mass concentrated at the top of slender supporting system hence these structures are especially vulnerable to horizontal forces due to earthquakes. Comparison of elevated tanks with different supporting system, capacities and seismic zones states that these parameters may considerably change the seismic behaviour of tanks. Read More...
|
Civil Engineering |
India |
323-328 |
74 |
Comparative Study in Fly Ash, Glass Powder and Recycled Concrete Aggregates as a Partial Replacement of Materials in Conventional Concrete
-Ankit Nagar ; Lavina Talawale
During recent years, the consciousness regarding environmental atrocity has increased as a result the interest of the construction community in using waste or recycled materials in concrete has also aggravated. If we see around us, we can see so many materials we consider waste which rather must be opportunities. The fly ash is produced in abundance in the thermal power plants as abate product which is not easy to be disposed of and is dangerous to the environment. Recycled aggregate can be used for many purposes. To address the environmental effects associated with cement manufacturing, it is crucial to advance alternative binders to compose concrete. If a few waste materials found convenient and economic for concrete manufacturing, a major gain will be achieved in the disposal of waste management and depression in construction cost. The work audits the feasibility of fly ash, glass powder, and demolished concrete as a partial substitute of cement and natural coarse aggregate, respectively. For this intent, the procedure is partitioned into two stages. In first stage replacing 25% cement content with different proportions of fly ash and glass powder. Further tested for compressive and flexural strength, at 7 days, 14 days & 28 days and correlated with conventional concrete. Read More...
|
Structural Engineering |
India |
329-332 |
75 |
Private Cloud and Its Security
-Yash Tawade
The demand for cloud computing is increasing and a lot of organizations tend to use it to store and method their knowledge. Nowadays cloud computing may be a terribly known technology in IT enterprises. For an organization, the info hold on is extraordinarily terribly massive and it is terribly worshipped. Thus, it becomes vital to own the secured use of information. Private cloud may be a variety of cloud computing that delivers similar blessings to the general public cloud, together with quantifiability and self-service, however through a proprietary design. Read More...
|
B.sc IT |
India |
333-334 |
76 |
Smart Healthcare Technologies
-Aditya Nitin Patil
Health care may be a wirelessly act system of apps and devices that connects patients and health suppliers to diagnose, monitor and store. it is accustomed solve several un healthiness is sue like chronic un healthiness and plenty . health care is truly sensible as a result of due to the devices connected to patients bracelets, watches and a lot of it is doable to gather knowledge on the health standing of patients to require care of them, even remotely, and stop essential things The progress of developing and implementing may be a major issue during this sector. Several of those devices contain sensors that senses the motion in our body and square measure connected to net that provide info of health and helps in reducing strain on health care systems, and might provide folks higher management over their own health at all times. In these paper numerous unhealthiness that square measure inbound square measure been resolved by new technologies and might get updated on daily. Read More...
|
B.sc IT |
India |
335-336 |
77 |
Measuring Similarity Between Text Documents for Information Retrieval
-Geetanjali Gupta ; Mr. Kapil Shah
There are several parameters by which similarity can be evaluated. The first categories of similarity evaluation is based on the document size and structure the length of the document, the number of paragraphs, number of sentences, average number of characters per word, average number of words per sentence etc. The second category is based on “styleâ€, whether the contents have been written in the first person conversational style or in the third person and so on. Thirdly, similarity can be based on the set of words used in the document. The fourth category of similarity is “content Similarity†which reflects to what extent the contents of the two documents are alike. This category is adopted throughout this thesis wherever similarity is talked of hereafter. The similarity between two documents is computed by any one of the several similarity measures based on the two corresponding feature vectors, e.g. cosine, dice, and jacquard measure. In this paper we measure similarity between texts documents using terms and token. A Document represented in a 3-Dimensional term vector space. There are several similarity coefficient are used to compare similarity. We used Euclidean distance to check the similarity. Read More...
|
Computer Science and Engineering |
India |
337-341 |
78 |
Sentiment Analysis on Reviews of E-Commerce Websites Using WordCloud And NaÃve Bayes
-Vedant Sharma ; Anil Kumar Gupta; Sarvesh Dahakunkar; Suyash Chopda; Suyash Lokhande
On E-commerce websites the sentiment analysis is very much essential and advantageous. The results stored in the web are present in an ever increasing amount. Also the amount of people searching items from the web is increasing. As a result, the reviews or posts by the user are increasing with each passing day. These reviews reveal the user’s attitude towards the product, which is very helpful for customers. This helps customers to know other people’s opinions on the product of their interest. Usually, E-commerce reviews involve many aspects of products, e.g. Appearance, quality, price, logistics, and many more. In this paper, we define the aspects of products, and present a sentiment analysis approach for E-commerce reviews which involves quantification of the sentiments of thousands of reviews. And finally, providing the customer summarized data about the expressed sentiments in way of intuitive and easy to understand charts and other visualization. Read More...
|
Computer Engineering |
India |
342-344 |
79 |
Designing and Implementation of Multipurpose Land Mine Detector Robot (with Raspberry Pi)
-Abhishek Kisan Jadhav ; Mrs. Lakshmipraba Balaji; Mayuri Manohar Batule; Rutuja Dhananjay Shevate
Land mine detector robot (LMDR) is one of the modern world engineering masterpiece. As this technology is capable of providing services to the most important sector for any country i.e. the defense Sector. The advancement in LMDR technology is at its peak during the recent times. Here we propose a more efficient system which can help in surveillance as well as detection of the land mines located underground. The main objective of this is detection of land mines and explosives that are dogged underground by the opposition in the war to restrict the military troupes coming to the specific area of land. For this we have an onboard metal detector sensor which will detect the land mines because land mines are made up of metals. As well as we have a GPS module which provides us real time location of LMDR. Also we have onboard camera and raspberry pi module for real time streaming of video so that the LMDR could navigate to any area and this will help the person driving the system. As soon as the mine is detected by the sensor an alarm will glow on the website which is specially designed for LMDR control. Also the live streaming of video as well as the location tracking system along with the control buttons all are present on the same website. The availability of all this data which can be remotely assessed onto a single system and webpage makes the monitoring easier and effective. Read More...
|
Electronics and Telecommunication Engineering |
India |
345-346 |