High Impact Factor : 4.396 icon | Submit Manuscript Online icon |

A Review on Optimization and Analysis of Machining Process for Differential Case

Author(s):

Hardik K. Bhatt , HJD Institute of Technical Education & Research, Kera; Prof. Jay K. Pandya, HJD Institute of Technical Education & Research, Kera; Prof. Hitesh L. Jadav, HJD Institute of Technical Education & Research, Kera

Keywords:

Accuracy, Cycle Time, Differential Case, Fixture Design, Machining Operation

Abstract

Differential casing is an important component of an automobile. It is first casted with sand casting and then two machining process (i.e.) milling and turning are carried out on it. In this project the machine development process is introduced. In which the milling and turning operation are combined together to form a same differential. As a result of which the production will be increased, reduce loading/unloading time, reduce lead time, increase surface finish and reduce cost per component of differential case.For this combined machining operation a new design of fixture is designed for the ATM machine with same operational sequence with turning and milling machining operations which results in optimum machining time. Compare the old machining cycle time with the new developed machining cycle time.

Other Details

Paper ID: IJSRDV2I11038
Published in: Volume : 2, Issue : 11
Publication Date: 01/02/2015
Page(s): 99-100

Article Preview

Download Article