Static Analysis of Single Lap Joint of Composite Materials

Mechanically fastened joints are critical parts in composite aircraft structures. The composite structural members are highly used in the following applications such as aerospace, automobiles, marine, architecture etc., In the past decades, adhesive bonding is a practical joint method for joining composite materials which provide low shear and tensile strength .To improve the tensile strength, the joint is made with material joint. Glass Fiber/Chopped strands mat and Bi-Directional fly / Epoxy composite is fabricated by hand lay-up method. The tensile properties of the material joint are obtained and compared with that of bolted joint. The experimental results shows that the material joint has superior tensile properties than the bolted joint and the Bi-Directional fly composite exhibits superior tensile strength than the chopped strands mat. Finite element analysis also done and compared with the experimental results and found to be similar.