The objective of the present study is to investigate the optimal process parameters of Electric Discharge Machining (EDM) on Inconel 800 alloy material with molybdenum as a tool electrode. The input parameters considered were voltage, pulse on time, pulse off time, current and bed speed for the experimental work and their effect on Material Removal Rate (MRR) and Surface Roughness (Ra) while machining Inconel 800 in Wire Electric Discharge Machining (WEDM). The effect of various process parameters on machining performance is investigated in this study. Taguchi method is used to formulate the experiment and L18 orthogonal array is selected for the experimentation. ANOVA is used to analyze the effect of input process parameters on the machining characteristics. To predict the machining characteristics using Artificial Neural Network (ANN) is used and were later compared with the experimental results. The results of the present work reveal that proper selection of input parameters play a significant role while machining with EDM.

Read More...

Evaluation of Software reliability plays significant role in the development of software, but the conventional software evaluation method generally aims at evaluation by use of failure data which is gained only after testing or handled in the last phase of the software life cycle. So people expect to get each stage’s information about the software’s reliability which is taken as the reference to guide the software’s design, analysis and testing and so on. A software reliability evaluation method is put forward in this paper, which focuses on lots of information correlative with reliability during the entire software life cycle. At last an application is put forward to demonstrate the viability of this method.

Read More...

Cloud Computing is a computing where many people throughout the world are connected to private or public networks. It is internet based computing through which we share data along with various services also. The main and important concerns about the cloud storage services are authorization and trust management for the cloud service provider (CSP).Third Party Auditor (TPA) plays important role to achieve these problem. TPA has expertise and capabilities that cloud users do not have and is trusted to assess the cloud storage security. In this paper we give and discuss about few emerging trends in cloud computing as well as we proposed a new model i.e. Intelligent Third Party Auditor(ITPA).This model used various technique like compression, encryption ,Meta data with all related operation(Insertion, Deletion, Update) .This proposed model are introduced for confidentiality, integrity and access control for cloud storage systems. This proposed model also reduced computational and communication cost between CSP and User as well as between User and TPA. We are trying to propose here soft computing by taking pattern recognition in Robust Module.

Read More...

Now a day’s child often falls down in the borehole which is left uncovered and gets trapped. It is very difficult and also risky to rescue the trapped children. A small delay in the rescue can lost the child his or her life. The objective of the paper is to construct and design a bore well rescue robot (i: e to rescue a trapped baby from bore well). This helps to controlled human robot that gives an insight view of rescuing the baby safely and steps taken to achieve this. This paper aims to design “Robot to rescue of a child in a bore well” which is capable of moving inside the pit. It is an innovative idea to rescue the children fallen into the bore well. This rescue operation is performed by combining motors, relays, sensors, micro controllers and camera to form a robot. The robot has an arm that possess a special gripping mechanism to rescue the child; in addition to that the position of the child can be observed with the help of the camera integrated with a light attached to it. In order to make the robot go inside the pit, a pulley control module is utilized which is integrated with the sensors. The robot consists of several motors to perform the necessary tasks. All the motors and sensors are interfaced by a PIC micro controller along with the LCD display from which the inside view can be seen through it.

Read More...

The timing elements and clock interconnection Networks such as flip-flops and latches, is One of the most power consuming components in modern very large Scale integration (VLSI) system. The area, power and transistor count will compared and designed using several latches and flip flop stages. Flip Flop is a circuit which is used to store state information. Power consumption is one of the main objectives in designing a flip flop. The flip flops used in designing are Hybrid Latch Flip Flop (HLFF), explicit- pulsed data-close-to-output flip-flop (ep-DCO) and Adaptive-Coupling Redundant Flip-Flop (ACFF). Compare pulse triggered latches based on transistor count, power and layout area. Constructing shift registers by using conditional capture pulsed latches instead of normal flipflops, because a pulsed latch is much smaller than a flip-flop. All the latches and flip flop designs are made by using 90nm technology in DSCH2 schematic tool and MICROWIND design tool.

Read More...

A real time indoor environmental air pollution measuring system which is cost efficient is sole aim of this paper presentation. Real time indoor air pollution measuring system measures the concentration of various gases in air at the particular time. Some of the indoor air pollutant is CO, CO2, NO2, Formaldehyde, O3 etc. Constant exposure to this pollutant over a long period causes harmful effect on human health. Effect of poor indoor air-quality on human-health is cough, lung disorder, liver and kidney disorder. Some pollutant like Asbestos, Radon can even cause cancer. Proposed measuring system contains a series of sensors, open source hardware Arduino board, a wireless sensor network based on ZigBee. The performance of system is checked in real-field.

Read More...

In mobile cloud computing (MCC), mobile devices can be rely on cloud computing and resources are stored to perform computationally various operations such as searching, mining and accessing the files in secure manner. During the file access in secure network, there are no efficient cryptographic algorithms. For secure the files in cloud, various cryptographic approaches are used but most of them increase the computational cost of file storage. Thus a new technique is required to develop which efficiently used for data storage and data access. Therefore the presented work is intended to find an approach by which the security in file hosting and management can play an important role. Therefore, we give techniques and algorithms for secured access in mobile cloud environment. So we can provide three tier architecture that includes MD5 (Message Digest) algorithm, Advance encryption standard algorithm and Elliptic curve cryptography algorithm. These algorithms can be implementing in real time mobile cloud environment and an experimental result proves with minimal performance degradation.

Read More...

The present study has been taken up for evaluating the different grades of concrete. Emphasis has been given to the compressive strength, flexural strength, split test and workability properties of glass fiber concrete beams. This paper presents the results of an experimental investigation carried out on ten re concrete beams, 150 mm 150 mm 700mm in size. The beams were tested under two point loading. 90 cubes 150 mm 150 mm and 10 cylinder of 150 mm dia &300 mm length with different dosages of glass fiber (0%, 0.5%, 1.0%, 1.5%&2.0%) The study parameters include first crack load and ultimate load. And load was at 5.2 KN/s in 2000 KN compressive testing machine.

Read More...

Now a day’s mobile air-conditioning system health check at workstation / service station is done by, the feel of air flow by hands, and measures air vent temperature by thermometer. This procedure is not accurate enough to conclude whether the AC system performance is up to the mark or not. If problem persists then we instrument the vehicle with thermocouples, pressure gauges and capture the data it asks for using different equipment’s like data logger, data processor, which is time and money consuming.Hence, there is scope to improve the diagnostic method and establish standard procedure to minimize the time required for mobile AC system troubleshooting. Major issues faced in mobile AC system are as follows- – No refrigerant – Insufficient refrigerant – Excess refrigerant – Air entered in refrigerant circuit – Inadequate heat rejection / poor cooling. – Blower not functioning – AC compressor pumping failure – Restriction in refrigerant high pressure line – Excess opening of expansion valve – Blockage in expansion valve This paper documents method to diagnose mobile AC system by monitoring refrigerant circuit pressures and AC vent temperatures. Also it documents different remedies to rectify / troubleshoot the issue in minimum time.

Read More...

Social network is one of the admired communication medium and serves as the platform for tracking and analyzing public sentiment of various people on different domains or products. With the explosive growth of user generated messages, Twitter and Facebook has become a social site where millions of users can exchange their opinion. Sentiment analysis affords as an economical and effective way to expose public opinion timely, which is critical for decision making in various domains. Similarly, due to the large volume of opinions, rich web resources such as discussion forum, review sites, blogs and news etc are available in digital form; much of the current research is focusing on the area of sentiment analysis. The information is very useful for businesses for marketing, governments and individuals. While this content meant to be helpful, analyzing the bulk of user generated content is difficult and time consuming. In the existing system there is no way of analysis and ranking the user opinions and sometimes they consider the individual opinions without conducting any reviews. But in proposed there is a need to develop an intelligent system which automatically extract such huge content and classify them into positive, negative and neutral type using Artificial Neural Networks based on the specified criteria.

Read More...

The main aims of this paper is hydrodynamic analysis of Intze water tank and comparison of the cost of water tank for different staging conditions like shaft and frame type. For this the container of the water tank has designed by prepared Excel worksheet. The hydrodynamic analysis is carried out in excel worksheet. The staging part is analyze in software STAAD Pro. V8i and the design has been done in excel worksheet. The configuration of container was taken same for different staging in same capacity. For frame type supporting system the horizontal parallel type bracing was considered at various levels. Here various parameters change is tank capacity, number of column, height of staging, spacing of bracing, earthquake zone and soil type. After the complete design the quantity of material has been founded and then the costing of water tank is done using GWSSB- SOR (2013-14).

Read More...

Due to the high density of the chip, the power dissipation increases. So we are in the need of the best power optimization techniques. Reversible logic is the one which is used to optimize the power getting wasted. Reversible logic finds its applications in the field of low power CMOS designs, quantum computing, nanotechnology and optical computing. There are number of circuits designed by Reversible logic and possess their own importance in the digital world In this paper we have proposed a new reversible T-Flip flop using a newly proposed RHR(Raju Hazar Rahul) Gate. It is also shown that the proposed one is better than the existing one. Using the proposed design we also have implemented the counters which owns many advantages compared to the existing one.

Read More...

This paper represents the reconstruction of sampled signal in CS by using OMP algorithm. We have used the concept of compressive sensing for sub Nyquist sampling of sparse signal. Compressive sensing reconstruction methods have complex algorithms of l1 optimisation to reconstruct a signal sampled at sub nyquist rate. But out of those algorithm OMP algorithm is fast and computationally efficient. To prove the concept of CS implementation, we have simulated OMP algorithm for recovery of sparse signal of length 256 with sparsity 8.

Read More...

This paper discusses about the Mode Conversion from TE11 to TM11 mode in circular waveguide using step discontinuity is investigated. We use this method for Ku band (12GHz – 18GHz) application and our designed frequency is 15 GHz. We get the amount of power converted from TE11 to TM11 is 10 to 20 %. In this paper we have designed the light weight, compact size and high directivity Circularly Polarized waveguide with high Directivity, high Gain, low return losses and good VSWR. It is found that an abrupt change in guide radius (step) will produce a wide range of mode conversion which can be used in most dual – mode feed horn applications. The step discontinuity is found to produce relatively constant mode conversion over a wide band of frequencies. In this we have varied the length, flare angle, aperture diameter of the conical antenna These dimensions will explain the required features such as impedance matching, radiation pattern of the conical antenna. The electromagnetic accuracy of the antenna is measured with the help of High Frequency structure simulator (HFSS) Software. The measured results of the conical antenna confirmed the simulation results and satisfied the design requirement. In view of this paper, the measured results show that this antenna has gain of 10.80 to 13.20 dB, bandwidth of 300 %, return losses level of -25dB. Simulation for horn antenna has been done on Ansoft HFSSv11.

Read More...

The present specially designed vehicle for the physically challenged person which can be driven and controlled by legs in which the steering control is transferred from hand to leg by the technical modification. The whole embodiment of the invention function dependently with all technical configuration of hollow and solid shaft, ball bearings, teethed wheels, gear chain, and circular plate, electrical, additional wheel and other integral components. The technical field relates to the hand free motorbike for the physically challenged person. More specially the invention relates to foot control steering plate incorporated with ignition system, accelerator and brake pedals comprising electrical indicator (Sound horn, Flash and Direction lights). The invention further provides two additional wheels for the safety balance which is integrated to the rear end. In the present generation the automobile usage all over the world is increasing phenomenon in which particularly vehicle to them. The existing vehicles for physically challenged person mostly available for persons with both hands so to address this problem, the present invention introduced with an all driving features functioned by legs which facilitated the hand less person to self-drive the motorbike.

Read More...

In recent year weight reduction is most important research in Automobile industry. Reduction of weight while increasing or maintaining good strength of products is most important in the modern world. And this weight reduction is possible by introducing Composite materials .Therefore composite materials are solution of such type of problems. By using composite material we design a composite leaf spring for suspension system of light weight vehicle. In this we describe design and analysis of composite leaf spring. The objective of our product is to compare the strength and weight of composite leaf spring with that of steel leaf spring. Now a day’s industries are interested for replacement of steel leaf spring with that of composite leaf spring, because the composite materials has high strength to weight ratio, good corrosion resistance & low weight. There are different composite materials. The material selection depends upon availability of resource and also depends on its properties. In our project high strength with low weight composite material is required because it is used in suspension system. The composite materials E-glass epoxy, carbon epoxy, graphite epoxy, polythelylene terephthalate, polytetrafluoroethylene are actually used. The most preferable composite material is glass fiber reinforced polymer (E-glass epoxy). The strength of composite multi leaf spring varies in percentage is depending on material selection. If we use E-glass epoxy then about 60-70% weight reduction is possible. The design of model will be done on CATIA & analysis on ANSYS.

Read More...