No. |
Title and Author |
Area |
Country |
Page |
1 |
Solar Refrigerator
-Abhishek Pandey ; Abhishek Yadav; Ankesh Chaturvedi; Kailash Chaurasia; Harshit Srivastava
This paper is a demonstration of an eco-friendly methodology for the implementation of solar powered thermoelectric refrigeration system. Solar energy is the most abundant and renewable source of energy in environment, and hence it is used in our paper. In conventional refrigerators, moving parts or rotating parts like compressor, expansion valve, coolants etc. are involved which leads to some vibrations and noise. Even coolants are not eco-friendly and much more costly. But in thermoelectric refrigeration system, these mechanical parts and coolants get eliminated and a thermoelectric module is used instead. Still there are many rural areas where people have to deal with electricity problems; this module will be very helpful to them as it runs on solar energy. Food items and other different required things can be stored in it. The paper is designed for implementation of solar fridge with temperature monitoring as well as controlling. This implementation uses solar panels for charging a Lead Acid Battery (12V, 7.2 Amp hrs.), a peltier thermoelectric device which when connected to battery generates cooling effect on one side and heat is generated on the other side which unwanted and is drawn off using a cooling fan of heat sink. Read More...
|
ELECTRICAL AND ELECTRONICS ENGINEERING |
India |
1-4 |
2 |
Impact of E-Commerce on Indian Market
-Monika Ghotia ; Devender Kumar
The e-commerce has transformed the way business is done in India. The Indian e-commerce market is expected to grow to US$200 billion by 2026 from US$38.5 billion as of 2017. Much growth of the industry has been triggered by increasing internet and smartphone penetration. The ongoing digital transformation in the country is expected to increase India’s total internet user base to 829 million by 2021 from 560.01 million as of September 2018. India’s internet economy is expected to double from US$125 billion as of April 2017 to US$ 250 billion by 2020, majorly backed by ecommerce. India’s E-commerce revenue is expected to jump from US$ 39 billion in 2017 to US$ 120 billion in 2020, growing at an annual rate of 51 percent, the highest in the world. Read More...
|
COMMERCE |
India |
5-6 |
3 |
Design & Fabrication of Multipurpose Agricultural Vehicle
-Vinay Shaha ; Ayyaj Mulla; Ganesh Shinde; Mayur Kumbhar; Shailesh Mokashi
India is an agricultural country cultivating more no of ground nuts, corns and various horticulture in the village side of the country. The available automatic machines are imported from foreign countries. The imported machines are not only bulk in size but also costing around rupees 1 Lakh. In this project the attempt has been made for the design and fabrication of Multipurpose Agriculture Vehicle exclusively for small farmers at cost not exceeding Rs.20000/- per unit with less maintenance. The different components of above multipurpose machine are modelled using CATIA. The modelled components are fabricated and assembled together to form a complete vehicle. A study has been carried out to develop multipurpose agricultural vehicle for performing major agricultural operations like spraying, fertilizing, ploughing. It will reduce the cost of spraying, pesticides sprinkling and crop cutting the field and will help to increase economic standard of an Indian farmer. The model does not need to use any kind of fuel or motor power as a power source. The design of multipurpose agricultural vehicle machine will help Indian farmer in rural side. Read More...
|
Mechanical Engineering |
India |
7-9 |
4 |
Semi-Automatic Pneumatic Sheet Metal Cutting and Bending Machine
-Vijay Rengaraj P ; T. Santhosh; G. Shree Hari; K. Sibi Mayuran; R. Vivek
Aluminium is one of the most used materials in the modern world. Starting from industrial oriented purposes to normal day to day usage, aluminium and other sheet metals are playing a great role. Sheet metals such as galvanized iron, aluminium etc. are widely used and are often cut by using hand-oriented techniques such as cutter machine or cutting blades etc. This is generally hazardous to workers and takes a lot of time to do the job precisely and accurately. A lot of small-scale industries are using sheet metals and the cutting and bending operations required to be done in such materials normally makes it a tedious one. It consumes both time and work force. This project aims at eliminating all these to the maximum by making this process an automatic work. Hence reducing a lot of time and work force in small and medium scale industries. Our project is very cheap and portable meeting the expectations of a small to medium scale industry by designing it to be cheaper and at the same time to be cost efficient. The main principle behind this is to use a pneumatic piston to operate the cutter and bender providing the cutting force through the upward and downward stroke obtained by the in and out entries of air from compressor by using a solenoid valve. The solenoid valve is operated by an IC electronic timer circuit. The operation speed is also controlled by a resistor. The cutting force produced is enough to produce shear on material whose shear force is less than 733.6N. Hence a wide range of sheet metals can be cut easily quicker and avoids fatigue over the material since the job is done in a single stroke. Also cutting and bending operations can be simultaneously done at the same time while the machine is working and so the job is completed at a very high rate when compared with man work. The machine can work either in battery or through direct power source, designed to be at a portable size with less weight and hence highly portable. Thus, sheet metal cutting and bending operations are automated and cost efficient by this project making it desirable for small to medium scale industries. Read More...
|
Bechlore of engineering in mechanical |
India |
10-14 |
5 |
Design and Development of Prototype of Anti-Lock Braking System (ABS) for Electric Motorcycle based on Hardware in Loop Simulation
-Brij Bandhu Singh ; Shaikh Aamir Imtiyaz
elements gives more effective and accurate results, which increase the efficiency of the system. Electronics content in an automobile provides more safety along with better performance. ABS is an active safety feature for two wheelers, four wheelers and for the electric vehicle also. This paper presented a Hardware in Loop Simulation (HILS) test of the ABS for an electric motorcycle. HIL test always helps to improve the performance of the prototype design model. HILS system components are software part, hardware part, and interfacing part. Once simulation results are collected it is required to run the system with load conditions in the real world. ABS is tested under different braking conditions and with dry surface road conditions. Results between simulations and HILS test is evaluated on the MATLAB/Simulink environment. Read More...
|
Mtech(Mechatronics) |
India |
15-18 |
6 |
Structural Health Monitoring (SHM) of RCC Structure
-Prof. P.S.Shinde ; Mr.S.A.Jadhav; Mr.V.R.Kamble; Mr.S.Y.Mulla; Mr.A.R.Narale
Structures were assembled of load carrying members capable of safely transferring the superimposed loads to the foundations their main and most looked after property was the strength of the material that they was made of concrete & other integral material used for construction purposes. Thus strength of concrete used was required to be known before starting with any kind of analysis. In the recent past various methods and techniques called as Non-destructive Evaluation (NDE) techniques are being used for Structural Health Monitoring (SHM).The use of the ultrasonic pulse velocity tester was introduced as a tool to monitor basic initial cracking of concrete structures and hence to introduce a threshold limit for possible failure of the structures. Experiments using ultrasonic pulse velocity tester have been carried out, under laboratory conditions, on various concrete specimens loaded in compression up to failure. Read More...
|
Civil Engineering |
India |
19-22 |
7 |
Minimizing the Queue Overflow Probability Using Wireless Scheduling Algorithm
-K Anand ; Mr S Muni Kumar
In this paper, we are interested in wireless scheduling algorithms for the downlink of a single cell that can minimize the queue-overflow probability. Speciï¬cally, in a large-deviation set- ting, we are interested in algorithms that maximize the asymptotic decay rate of the queue-overflow probability, as the queue-over-flow threshold approaches inï¬nity. We ï¬rst derive an upper bound on the decay rate of the queue-overflow probability over all scheduling policies. We then focus on a class of scheduling algorithms collectively referred to as the “algorithms.†For a given, the -algorithm picks the user for service at each time that has the largest product of the transmission rate multiplied by the backlog raised to the power . We show that when the overflow metric is appropriately modified, the minimum-cost-to-overflow under the -algorithm can be achieved by a simple linear path, and it can be written as the solution of a vector-optimization problem. Using this structural property, we then show that when approaches inï¬nity, the -algorithms asymptotically achieve the largest decay rate of the queue-overflow probability. Finally, this result enables us to design scheduling algorithms that are both close to optimal in terms of the asymptotic decay rate of the overflow probability and empirically shown to maintain small queue-overflow probabilities over queue-length ranges of practical interest. Read More...
|
Master of Computer Application |
India |
23-26 |
8 |
Water Quality Improvement Using Low Water Filter Material
-Shubham Narendra Dongre ; Vishal Londhe; Rahul Pakhiddhe
About one-fifth of people on earth lack the access to safe drinking water, a condition that resulted in the death of 2.2 million people in 2004, as per the records of United Nations. Clean water use 1being a prime concern in many communities of developing countries. Contaminated water plays significant role in taking numerous lives in these localities, for which a number of efforts are being made for accessing safe purified drinking water. Fortunately, efficient and cheap water purification systems are being utilized and being tried to be accessed worldwide for easy access to clean water. Read More...
|
Civil Engineering |
India |
27-29 |
9 |
Common Element MIMO System Antenna Design For Wi-Fi/LTE Access Point
-Kartiki Prakash Gaikwad ; Kiran Vijaykumar Thorat; Gayatri Navnath Gend; Priyanka Ashok Nakate; Prof. A. A. Jadhav
Wireless technology is one among the most areas of analysis within the world of communication systems these days. In this project we have designed two element slotted patch antenna for two different application that is Wi-Fi (wireless fidelity) and LTE (long term evolution) which operates on the frequency 2.4GHz and 2.6GHz. The second group concentrated on design and simulation of patch antennas (Which are widely used in cell phones today) with an emphasis on optimization of a 2.4 GHz rectangular probe fed patch antenna. A dual band antenna and a microstrip fed patch antenna were used in the communication system. Read More...
|
Electronics and Telecommunication Engineering |
India |
30-33 |
10 |
Computerized Accounting
-Monika Ghotia ; Devender Kumar
An accounting system is a collection of processes, procedures and controls designed to collect, record, classify and summarize financial data for interpretation and management decision making. Computerized Accounting involves making use of computers and accounting software to record, store and analyze financial data. Read More...
|
COMMERCE |
India |
34-35 |
11 |
Experimental Investigation on Light Weight Concrete by Replacement of Coarse Aggregate using Styrofoam with Adding Flyash
-Rajendiran M ; Dinesh Kumar A; Kanmani Prabhu C; Richard S J; Surendar S
This study deals about replacement cement and coarse aggregate by Styrofoam (50%) and fly ash (10%). This can reduce the weight of the concrete effectively. The mix design is followed by IS 10262 (2009) (GUIDELINES FOR CONCRETE MIX DESIGN PROPORTIONING). The M25 concrete is used. The 53-grade cement is used. The compression test, split tensile test and flexural strength were going to be done at the interval of 7 days, 14 days and 20 days. The class C fly ash is used since it has both pozzolanic property and Cementous property. Read More...
|
Civil Engineering |
India |
36-39 |
12 |
Information Provider via Biometrics Security
-Sahil Santosh Kulkarni ; Rushikesh Narendra Gaikwad; Omkar Shrinivas Cheriyal; Vijay Parshuram Chavan
Over the last few years a we have observe a focus on engineering science has been established whose products are likely to create a large market in the near future. It has been known 'biometrics". Nature has build every human beings with different characteristics which may vary from one person to another. This property is made use of by Biometric technology to perfectly identify each person Biometric technique is necessary to determine a pattern which determines a user pattern by determining the validity of a specific substantial or behavioral types influenced by the user. Individual major concern must be observed in making a practical biometric system. First, a user must be register in the system so that his biometric impression can be identified. This impression is securely stored in a central database or a smart card given to the user. The impression is fetched when an individual needs to be verified. Depending on the information, a biometric system can operate either in a verification (authentication) or a recognition mode. Read More...
|
Computer Engineering |
India |
40-43 |
13 |
Utilization of Agricultural and Commercial Waste Material in Construction
-Rajendra Vaskela ; Prof. Pankaj Rathore
Various materials with pozzolanic properties like fly ash, Condensed silica fume, blast furnace slag and rice husk ash have played an important part in the production of high performance concrete. During the late 20th century, there has been an increase in the consumption of mineral admixture by the cement and concrete industries. The increasing demand for cement and concrete is met by the partial replacement of cement by supplementary materials in concrete. Several pozzolanic materials have demonstrated their effectiveness in producing high performance concrete. This research deals utilization of the agricultural and commercial waste material into concrete, which may enhance the characteristics of concrete and makes environment eco-friendly. In the present work Rice husk ash (RA) has been used as partial replacement of cement in 10, 15, 20, 30%, and sand is also replaced by shredded steel waste in different proportions such as 10%, 15%, 20% and 30% and in third mix both the ingredients have been replaced simultaneously. Properties tested are compressive strength after 3, 7, 14 and 28 days and workability by measuring slump cone in 1:1:2 proportions. It has been observed that with the increase in percentage of RA compressive strength increases up to 20% and then decreases. However, with the increase in percentage of steel waste compressive strength keeps on increasing. Read More...
|
Civil Engineering |
India |
44-45 |
14 |
Investigation of Short Hybrid FRC by using Tensile and Wear Test
-Dileepan.N ; Rajadurai.B; Ramamoorthi.J; Ravichandran.T; Sakthi.M
In the modern era of metal-free minimally-invasive dentistry, there is a growing tendency toward using metal-free restorative alternatives that provide not only excellent aesthetics but also enable superior durability. Fiber-reinforced composite (FRC) is one cost-effective alternative that fulfills the requirements of aesthetics and durability. With advancements in the methods of research, the branch of Material science has seen its extremes but there are some areas upon which much attention should be focused. One such area is the natural composites. “Evaluation of Mechanical and Tribological Properties of Composite Materials†advance mechanical properties of composite material and making a new composite material with the help of preparation of specimen and performs various tests. Composite material are used in various place due to their light weight such as aerospace, automotive, smart material and chemical industries. This project works represent the results of mechanical and tribological test of composite. The large family of epoxy resins represents some of the highest performance resins of those available at this time. Epoxies generally out-perform most other resin types in terms of mechanical properties and resistance to environmental degradation, which leads to their almost exclusive use in aircraft components. Hand lay-up is the most common and least expensive open-molding method because it requires the least amount of equipment. Fiber reinforcements are placed by hand in a mold and resin is applied with a brush or roller. This process is used to make both large and small items, including boats, storage tanks, tubs and showers. Read More...
|
Mechanical Engineering |
India |
46-50 |
15 |
Partial Replacement of Fine Aggregates with Waste Glass in Concrete
-Talib Tariq Wani ; Azhar Nasir Wani; Ilawal Zubair Wani; Aatif Iqbal Lone
One of the largest industry which consumes natural resources is Concrete industry and it is a serious concern because it not only affect our environment but also survival of concrete industry is under high risk. The use of waste material in concrete minimize the disposal problem of the waste. The research is to check the potential of concrete by replacing its partial amount of fine aggregates with Waste Glass. The ratio of variation varies 0%, 5%, 15%, 25%, 35%. Concrete used is of M 25 grade. Cube specimen of size 150mm were made to check for compressive strength and cylinder specimen of 300mm in length and 150mm in diameter were made to check for split tensile strength test at 7, 14 and 28 days. Cubes were also tested for water absorption test after 28 days. Read More...
|
Civil Engineering |
India |
59-61 |
16 |
Role of Fertilizers in Sustainable Development
-Karan Kakashia ; Rahul Urkude; Vishal Nagpure; Sayali Perkar; Nikeeta Kale
India is second largest populated country in the world. Inrastructural development is an important parameter for the growth & development of any country. Hence day by day limited land wiil be be available for construction. There is need to see the probability to use forming land for infrastructural development. Today’s farmer is using chemical fertilizer for farming to enhance the yield of crops. Chemical fertilizer reduces soils fertility and it also contaminated ground water table. Vermicompost is the product of the composting process using earthworm to get biocompost from college biowaste.Recyling of camus biowaste is necessary it reduces campus waste .It makes our camus clean as well as contribute in sustainable development. Vermicompost will enrich the soil and its fertility. Vermicompost also leads to decrease the environmental problems. Vermicompost is a very important biofertilizer produced through the artificial cultivation of worms i.e. Vermiculture. Vermicompost is enriched with all beneficial soil bacteria and also contain many of the essential plant nutrients like N, P, K and micronutrients. Vermicomposting is the process of production of compost by breeding earthworms, resulting in homogeneous and stabilized humus used as manure and significantly increased the amount of N, P, K and C concentration in compost. Earthworms are terrestrial worms well adopted for burrowing life. They depend on soil for all of their activities hence they are called geobionts. Worms in the process of feeding on waste caused bio-oxidation by relentless turning, fragmentation and aeration of water by devouring resulting in homogeneous and stabilized humus like product. The fine granular peat-like end product, vermicompost is reported to contain elevated levels of nitrogen, phosphorous, potassium and organic carbon (NPKC) in available form, micro-nutrients, micro flora, enzymes, and growth regulation. As a result of the different processes involved in the producing of compost and vermicompost, they exhibit different physical and chemical characteristics that affect soil properties and plant growth in diverse ways. Chemical fertilizers are good for crop yield but in long run they create varioud harmful impact on environment particularly on water table and soil. Read More...
|
Civil Engineering |
India |
62-64 |
17 |
Design and Fabrication of Aqua Silencer in Four Stroke Petrol Engine with Noise and Vibration Analysis
-M. Venugopal ; Mahamood VP; Muhammed Ali Jalib Davari; Roshith P; Samson Saji
An Aqua Silencer is mainly dealing with central if emission and noise. It is fitted to the exhaust pipe if engine. Sound produced under water is less hearable than it produced in atmosphere. This mainly because if small sprockets in water molecules, which lowers its amplitude thus, lowers the sound level. The noise and smoke level is considerable less than the conventional silencer. A sound level meter is simply a device with audio frequency sensing capabilities that is controlled, essentially, by a microcontroller, which measures, compares, and triggers the appropriate action to reduce noise level nice the critical sound level has been exceeded. Vibration meters are used in many installations and machines as well as in the development if products, to measure vibrations and oscillations. Its measurements provide the following parameters: vibration accelerating, and vibration displacement. Read More...
|
mechanical engineering |
India |
65-66 |
18 |
Performance Analysis of Composite Materials by Hydrostatic Pressure Vessel
-Sivakumar.N ; Shahwaz Alam; Vishnu P. Nair; S Chellapandi ; Mohammed Afnas V
For any material to be used in a certain machine the testing of the same is important. This governs the durability of and the robustness of the machine to be used for the prime requirement of the material. For many years different testing procedures have been adopted for the purpose using air pressure, ultrasonic testing etc. but less is carried out using water pressure. This is because water when applied to high pressure does not change its volume hence, the output required is more accurate. So the idea of hydrostatic pressure vessel bought out. Read More...
|
Mechanical Engineering |
India |
67-70 |
19 |
Calculating Equation using Object Character Recognition
-Akash Vilas Lad ; Akash Lad; Priyal Vadgama; Stimit Sonawane; Aniruddha Wadekar
Object Character Recognition (OCR) is process of classification of object patterns contained in digital image. The character recognition is achieved successfully through segmentation, feature extraction and classification. In this paper it presents basic ideas of OCR needed for better understanding for Equation solving. It starts with brief background and history of OCR systems. In this various techniques of OCR systems are been used such as optical scanning and location segmentation also include pre-processing, segmentation, representation, extraction feature, training and recognition and post-processing. Than Equation solving is done by different Algorithm such as Cramer s rule, Gaussian elimination to provide best and reliable result of equation. Finally, future of Equation solving systems is presented. Read More...
|
Application based system |
India |
71-72 |
20 |
Review on Challenges and Security Issues in Mobile Ad Hoc Networks
-Rashmi Dongre
A mobile ad hoc network (MANET) is a network consisting of a collection of nodes capable of communicating with each other without the help from a network infrastructure. MANET faced lots of challenges allegorically routing, security and clustering. Security is actually an essential issue for the secured conversation in between mobile nodes in a dangerous ecosystem. Although security issues in mobile ad hoc networks have been a major focus in the recent years, the development of fully secure schemes for these networks has not been entirely achieved till now. MANET has no definite defensive structure, so that, it is easily accessible to both trustworthy networking end-users as well as destructive assailants. This paper, presents an elaborate view of issues in MANET security. Based on MANET’s special characteristics, we define three security parameters for MANET. Also in addition MANET security is divided into two different aspects and types of various attacks are also discussed in details. Read More...
|
Computer Science |
India |
73-76 |
21 |
Less Clothes or More Clothes: A Survey on Students Understanding of Sustainable Design
-Rakhi Wahee Pratap ; Dr. Himadri Ghosh; Dr. Isha Bhatt
Textile clothing sector is one of the most undetected polluting and unsustainable sector in the present scenario. Manufacturers and designers of fast fashion clothing are frequently bringing new styles and designs, every changing season. Retailers are introducing attractive sales and producers across the globe are promoting these fashion products by introducing new styles with little changes in the garment to lure the customers. E-Commerce platforms are further speeding up the process and deteriorating the situation by enabling the consumer to shop with a click of a button. Fashion style is not able to hold the interest of the wearer and are discarded when new styles are introduced, thus the product becomes obsolete much before its life span, resulting into unwarranted textile dumping and excessive clothing. The planet is suffering from various environmental hazards while producing excessive clothing and further while disposing it off. In this context it’s important to create consumer consciousness towards conserving the environment through constructive attitude. The research emphasizes upon an in-depth study and analysis of environmental and sustainable issues beyond the classroom learning. Assuming fashion and textile design students as tomorrow’s consumers and policy makers of fashion industry, the paper focuses upon sensitizing them towards sustainable design and utility practices. It will help them to act responsibly by maximizing apparel options out of minimum clothing. Students of Textile Design department of National Institute of Fashion Technology (Hyderabad, NIFT, INDIA), were given a task base assignment followed by a survey to enable them in exploring possibilities of reducing consumption in fashion industry and increasing clothing opportunities. Collected database has revealed that students reflected a shift from irrational consumerism. The developed sensitivity helped in coming up with interesting design and alternate solutions to support minimalistic clothing approach. The assignment has enabled them to understand fashion beyond frequently changing styles, cheap clothing options, throw away culture and disposable fashion. The new perspective of fashion is reflecting more clothing opportunities by lessening clothing consumption. This approach will enables them to raise concerns of unsustainable design practices by slowing down consumption and adopt sustainable approach. Read More...
|
DESIGN |
India |
77-82 |
22 |
Automatic Pothole Repair Technology
-Shubham Dilip Shirsath ; Raj M. Bag; Brajbhushan R. Yadav; Ketan K. Kudal; Bhushan J. Vispute
The main objective of the project is to design and fabricate an Semi Automated Robot, which will detect the Pothole on the road and will discharge the required amount on concrete quantity, which is needed for the detected pothole and to do the level ling process on the discharged concrete and hence the pothole on the road filled completely. The power source for the robot is switched ON and allows the robot to move on the road. The Ultrasonic sensor on the front of the robot is allowed to sense the surface of the road, if the pothole will be detected the sensor send the signals to the Arduino Controller, and the controller suddenly stops the movement of robot near the pothole, and allows to discharge the required concrete needed for the detected pothole. Then after filling the pothole the slider crank mechanism is used for level ling process. Read More...
|
Mechanical Engineering |
India |
83-84 |
23 |
Vision Based Autonomous Navigation Robot
-J. Karthikeyan ; S. M. Mahalakshmi; M. Ishwarya
This paper proposes a method to navigation of robot using camera. Controlling the traffic in the metro cities is the huge due to increase in the vehicles population and increase in accidents too. To prevent, many of the plans are implemented but fails. To overcome these problems, we come up the idea of Controllable Traffic Autonomous Car. The cars most nowadays are smart we utilize that idea and make a prototype which control according to the traffic signals and to prevent the accidents by the machine learning prediction and Open CV Neural Network technique. The main controlling unit if the car is raspberry pi which teaches the car to move in the path and to stop when the red signal in the traffic, to maintain the speed and to stop the car if it get collide with nearby vehicles. The distance between the cars is monitored with the help of ultrasonic sensor. The self is going to done by the convolution neural network and the object prediction by the Haar cascade classifiers. Read More...
|
Information Technology |
India |
85-87 |
24 |
Study on Pervious Concrete using Different Size of Course Aggregate
-Sumit Masharkar ; Abhilasha Deshmukh; Shubham Karemore; Vaibhav Bhodhe; Atul Wadhi
Concrete is a widely used structural material consisting essentially of a binder and a mineral filler. Concrete has been the leading material since it was used and is bound to maintain its significant role in the upcoming future due to its durability, adaptability to any shape and size and many other applications. It is a composite material produced by mixing cement, inert matrix of sand and gravel or crushed stone. Pervious concrete is a type of concrete that has a low watercement ratio and contains none of sand. This concrete has a light colour and open-cell structure because of which they do not absorb heat from the sun; they also do not radiate the heat back into the atmosphere, which reduces heating in the environment. Pervious concrete has low installation costs. In addition, it filters the storm water thus reducing the number of pollutants entering the rivers and ponds. Pervious concrete also improves the growth of trees. In the present study the behaviour of pervious concrete has been studied experimentally. Various mix proportions were prepared cement with fly ash (20% by the weight of cement) and 5% of cement replaced by fly ash. Different properties of pervious concrete e.g. compressive strength, permeability test at 7, 14 & 28 days have been studied experimentally. Read More...
|
Civil Engineering |
India |
88-91 |
25 |
A Brief Survey on the Security Model of Cloud Computing with Semi Trusted Third Party
-Sherin Shaju ; Shabna M
The emerging trends of cloud environment in the field of distributed computing, data security are a huge concern for most of the cloud users. In a cloud environment anyone can access the data, over the internet, therefore the authentication and access control are main issues to secure the data. Trusted third parties are the independent service providers who facilitate secure transmission of data between two parties. The Integrity of data should be ensured by trusted third parties. In this paper, the security is provided for the cloud environment with a semi trusted party which provides a) access control Mechanism b) Key Management c) Policy File Encryption d) Policy Revocation and e) Policy renewal. The results reveal that combined key algorithms can be effectively used for security of outsourced data by engaging key management and access control. Read More...
|
Computer Science and Engineering |
India |
92-96 |
26 |
Identify Cloud Access Rights Revocation Authority by using Identify Based Encryption
-B Ganesh ; C Hemavathy
Identity-based cryptography (IBE) could be a public key cryptosystem and eliminates the stress of public key infrastructure (PKI) and certificate administration in standard public key settings. Due to the absence of PKI, the revocation drawback could be a important issue in IBE settings. Several rescindable IBE schemes are projected concerning this issue. Quite recently, by embeded an outsourcing computation technique into IBE, Li et al. proposed a rescindable IBE theme with a key-update cloud service supplier (KU-CSP). However, their scheme has two shortcomings. One is that the computation and communication prices square measure beyond previous rescindable IBE schemes. The other defect is lack of quantifiability within the sense that the KU-CSP should keep a secret worth for every user. In this article, we proposed a new revocable IBE scheme with CRA to solve the two shortcomings, namely, the performance is significantly improved. For security analysis, we tend to demonstrate that the planned theme is semantically secure beneath the decisional linear Diffie-Hellman (DBDH) assumption. Finally, we tend to extend the projected rescindable IBE theme to gift a CRA-aided authentication theme with period-limited privileges for managing an outsized variety of varied cloud services. Read More...
|
Software Engineering |
India |
97-99 |
27 |
Optimization of Industrial Work for Part Loading Process
-K. Gugan ; Gowtham.R; Mohan Kumar.N; Mohan Karthick.P; B.Sakthivel
The work optimization refers finding optimal value or identify the best possible option, our industrial project did the work optimization in roots industries, the main objectives of the work is to minimize the human effort, which is done on the part handling process, initially the housing which is the part of the horn, is loaded by the labour in the pallet, in very normal way, In this condition time consumption is more, and high human effort too, according to the problem identification using of “Auto Rotate Table With Multiple Guide Liner†is the best solution to avoid that cons and also one labour is enough to manage two or more workstations, hence we considerably reduce the labour pay, by this we can obtain the efficient work for this part loading process. Read More...
|
Manufacturing Engineering |
India |
100-103 |
28 |
Traffic Problems at Reliance Square
-Rohan V. Devdhar ; Parth Patel
The quick urbanization has resulted in enhanced travel demands and thereby an increase in urban transport problems. The urban traffic problems are attested with traffic congestions, accidents, unauthorized parking, poor land use, inadequate transport planning as well as poorly maintained road networks. This study mainly focus on evaluation of traffic problems occurred at Reliance Square (kudasan), this study area is located near Gandhinagar city and having some serious traffic issues. Read More...
|
INFRASTRUCTURE ENGINEERING |
India |
104-105 |
29 |
IOT based Transformer Monitoring System
-Sagar Patil ; Prof. Vaibhav Kale; Shirish Patil; Roshan Patil; Narendra Patil
Distribution transformers are one of the most important equipment in power network. Because of, the large amount of transformers distributed over a wide area in power electric systems, the data acquisition and condition monitoring is important issue. The main aim of this system is distribution transformer monitoring and controlling through IOT. Also, it sends SMS to a central database via the GSM modem for further processing. The idea of on-line monitoring system mixes a global service mobile (GSM) Modem, with chip micro controller and different sensors. It is installed at the distribution transformer site and the above parameters are recorded using the analog to digital converter (ADC) of the embedded system. The obtained parameters are processed and recorded in the system memory. If any deviation or an emergency situation occurs the system sends SMS (short message service) messages to the mobile phones containing information about the deviation according to some predefined instructions programmed in the micro controller. Read More...
|
Electrical Engineering |
India |
106-109 |
30 |
Public Attitude towards E-Journalism and Print Media Extinct
-Mrs. R. Saranya ; Ms. Sharika Shree
E-journalism (Online news), social media and other online news sources are also known as the "New Media" have become an integral part of modern era. The main objectives of the study was to express the impact of E-journalism on Print media .Descriptive research method was implied with a sample of 400,news readers in Tiruppur. The study reveals that majority of respondents which includes 42% of young persons, prefer online to collect news and correct affairs. Print media has started losing many young readers.75% of respondents use online and other sources. Print media is costlier than online news. Most of the people prefer political news. User comment helps the people to connect with journalist. For people social media is a best platform to read news and voice their opinion. Twitter is the best social media. "NDTV" is the top most preferred E-Journalism app. In the point view of print media most of the people prefer "THE HINDU". E-journalism has a great impact on the society and it reduced the print media usage. People suggests, social media users to share a credible news, to reduce the cost of print media, to avoid a news on biasness for both online news and print media. In this running world, there is no time to spend more in reading news through traditional way. Many people no longer have regard for hard copies. Rather, they prefer going to the internet to read breaking news, watch movies and music, and engage in chatting, among others. Therefore this study concludes that E-journalism is better and cheaper than traditional media and that most people prefer it. There is more that one can do compared to traditional media where there are restrictions. The internet keeps on evolving time after time, new features or improvements are made from time to time to make the experience better. Read More...
|
Management |
India |
110-114 |
31 |
Characteristics of Low and Medium Grade Blended Cement with Silica Fume Sand
-Vijay Machhar ; Prof. Pankaj Rathore
Concrete can bear up the severest environmental conditions; however, in several conditions it may show very low characteristics. Hence, engineers worldwide are constantly trying to improve its characteristics with the aid of modern admixtures and waste materials, usually called as alternate building materials (ABM). Currently, concrete mixtures include different alternate building materials which produce part of the cementitious constituent. The major advantage of ABM is its capacity to substitute basic ingredients partially or wholly in concrete and still presenting the cementitious property. The use of waste material as ABM helps to consume these waste materials and also improves the properties of concrete in fresh and hydrated states. Most significant ABMs which are used very frequently are fly ash and silica fume as they enhance both compressive strength and durability of concrete. In the present research a series of experiments had been performed to make comparative study of various mechanical properties of concrete mixes prepared by using Portland cement and Fly ash blended cement (in 1:1 proportion). Concrete mixes are modified by replacing sand by silica fume in different percentages 5%, 10%, 15%, 20%, 25% and 30%. The ingredients are mixed in 1:2:4 and 1:1:2 proportions. The properties studied are 7 days, 14 days and 28 days compressive strengths, workability and porosity. Read More...
|
Civil Engineering |
India |
115-116 |
32 |
Experimental Investigation on High Strength Concrete With Partial Replacement of Recycled Coarse Aggregate for Coarse Aggregate
-Mrs. Saranya .S ; Mrs. R. Vanathi ; Mr. Saravana Kumar M; Mr. Shamuga Sundram S
This project work deals with an high strength concrete using waste aggregate. The use of concrete in recent years, have spread to highly harsh and hoist environment resulting in premature failure of number of structures. By replacing this type of waste aggregate to the concrete is a good solution to reduce the problem caused by this type of waste material. A recycled aggregate was obtained from the demolition of the concrete structures. These materials were collected and crushed in crusher and collected as aggregates. These collected materials were treated by several methods to remove the waste surrounded by it. Treatment can be done both by cooling and heating. The recycled coarse aggregate are replaced with 10%,15%,20%,25%and 30% to coarse with the treatment of NaOH -2N for 24hrs for compression and tensile strength. Read More...
|
Civil Engineering |
India |
117-123 |
33 |
Development of Electromagnetic Braking System
-Sunny Punalkar ; Amit Jagdale; Nikhil Phalke; Shreyash Taware; Kaveri Katake
The proposed mechanism implements this phenomenon in developing a braking system. The potential applications of the braking system can be a decelerating system to increase the safety of an elevator or any guided rail transportation system. To provide scientific investigation for industrial application of magnetic braking, this study presents four systematic engineering design scenarios to design a braking system. The constant magnetic field is the simplest and easiest design to implement. Read More...
|
Engineering |
India |
124-126 |
34 |
Green Computing: An Overview
-Km Komal Singh ; Himanshu Goel
Green computing is the study and practice of efficient and eco-friendly computing. The rule behind vitality proficient coding is to spare power by motivating programming to make less utilization of the equipment, as opposed to proceeding to run a similar code on equipment that utilizes less power.. This paper, first talk about the implication of green processing and outline scientists view on the up and coming age of IT frameworks for green figuring. Along these lines, this paper distinguishes key issues significant to green figuring and assess distinctive ways to deal with these issues. At long last, paper call attention to future headings of research and finish up the paper. Read More...
|
Computer Science and Engineering |
India |
127-129 |
35 |
Design and Development of Three Axis Pneumatic Modern Trailer by using CAD FEA Model
-Devendra P Mungmode ; Praful Lanjewar
This project has mainly concentrated on the difficulties arises while unloading the material from dumper or trailer and hence a suitable arrangement has been designed. Such that the vehicles can be unloaded Material from the trailer in three axes without application of any impact force. By pressing the Direction control valve activated. The compressed air is goes to the pneumatic cylinder through valve. The ram of the pneumatic cylinder acts as a lifting the trailer trolley. The pneumatic cylinder is coupled to the Air Compressor. This is definitely reduces the use of extra fuels and solve the problem of turning of truck in limited space. Read More...
|
M-Tech in Mechanical CAD-CAM |
India |
130-131 |
36 |
Image Interpolation Technique and Issues: A Review
-Kriti Sahu ; Prof. Shailesh Khaparkar
In computer graphics, image interpolation is the process of resizing a digital image. Interpolation is a non-trivial process that involves enhancement in sense of efficiency, smoothness and sharpness. With bitmap graphics, as the size of an image is enlarged, the pixels that form the image become increasingly visible, making the image appear "soft" if pixels are averaged, or jagged if not. Image interpolation methods however, often suffer from high computational costs and unnatural texture interpolation. This work intends to give an overview of image Interpolation, its uses & techniques. The paper work is an implementation of Image interpolation of images. Read More...
|
Image processing |
India |
132-134 |
37 |
Plug and Play Smart Switch
-Rahul Ramesh Kalekar ; Rahul Vidyasagar Kamble; Shreyas Natesh Rao; Akash Maruti Bhandare; Kaivalya Sanjay Wangade
Analog switches are fixed on switch boards that are mounted on the walls. To operate them user should go near switch board and press the switch to turn ON or OFF any device or appliance. This hassle of manually operating switch is replaced by a smart technique which involves operating switch using the android application in smart phones. The smart switch is a plug and play switch in which, user can plug device or appliance and can operate it from anywhere just by using an android application in smart phone. Even this smart switch facilitates scheduling mechanism in which, user can schedule the time period for which the device or appliance should remain ON using the same android application. The device will automatically turn OFF after the scheduled time period is finished. The switches are interfaced with few electronic components such as Arduino Uno, Wi-Fi Module and Relay. Smart switches already exist in the market today, but they are very expensive and require additional devices like hubs/Routers for their working. Read More...
|
Internet of things (IoT) |
India |
135-137 |
38 |
PIC Controller Based Automatic Headlight Moving System
-Pradnya Dipak Manave ; Sharad Mali; Asmita Khot; Sanjivani Apte
According to the survey maximum accidents occurs at night vision. Percentage of accident is more at the side of corner or road at the time of night. Vehicles headlights are very much important because it provides comfort and safety to drivers. The main reason behind accidents is the improper focus of headlight is not at proper position. To avoid this accident rate, in this system the headlight move left or right according to steering movement of that vehicle. For that system here PIC16F877 micro-controller is used. Second concept is based on automatic upper dipper using Light Dependent Resister (LDR), this automatic model identifies coming headlight focus and according to that focus LDR decides upper mode or dipper mode. Read More...
|
Electronics and Telecommunication Engineering |
India |
138-140 |
39 |
A Portable Bio Sensor Based System to Detect Abnormality in ECG Signals
-K. P. Jamunalaksmi ; Vijayaraghavan .R; Ramyadevi .G; Irfhan .A
Now a days population growth increases exponential and also health disease increases especially cardiac disease. Heart Sound delivers vital physiological and pathalogical evidences about health, Wireless Cardiac Auscultation offers continuous monitoring of an individual without 24*7 manual health care services. This proposed model provides a communication system which consists of wearable device used to monitor physical parameters like Temperature, heart beat and ECG with the help of respective bio sensors using arduino uno. The sensed information is sent to the processing unit. A desired amount of sensor value is predefined and if it exceeds or below to the predefine value the alert being sent to doctor using GSM module and same time sensor information will be updated in a cloud using wifi module. The overall system will provide a way for heart disease self-management. Read More...
|
Biomedical Engineering |
India |
141-144 |
40 |
Study and Development of Properties of Nano Concrete
-Nikhil Srivastava ; Mohammad Saif Asad; Surya Prakash Sharma; Ankur Kumar
Nanotechnology is one of the most active research areas that include a number of disciplines including civil engineering and construction materials. Nano technology is the study of the control of matter nano atomic and molecular scale. It deals with the size 100 nanometers or smaller, and involves developing materials or devices within that size. Nanotechnology is being applied to paints and insulating properties, produced by the addition of nano-sized cells, pores and particles. This type of paint is used, at present, for corrosion protection under insulation since it is hydrophobic and repels water from the metal pipe and can also protect metal from salt water attack. TiO2 nano particles are also being used in coating material. Read More...
|
Civil Engineering |
India |
145-151 |
41 |
Digital Training and Placement
-Miss. Pawar Madhuri Bharat ; Miss. Shinde Sonal Anil; Miss. Sawant Pooja Vijay; Miss. Bhosale Shital Chandrakant; Prof. Kulkarni Sarang Mukund
It is difficult for TPO/Staff to inform every student about the training and placement activities. A new notice will have to be displaying for every upcoming training activity for a visiting company. In this project, we implement a way to bring information to student about T&P Activity, Organization and Department level notices. We view this information by using android mobile phones. An SMS notification app only enables student who are registered. This app enforces security with the use of secrete information (Username & Password). With the help of this user friendly application, the students can easily check notifications regarding various training and placement activities. They can also view details about the company that will visiting the campus for the recruitment drive .The TPO can view, add, update and delete the profiles of students. It creates the eligibility list of students as per the company s criteria. Also, the TPO can easily pass messages to the students as well as the TPstaff. So with the help of this application, everyone can easily stay updated with the training and placement process. Read More...
|
Computer Science and Engineering |
India |
152-153 |
42 |
The Impact of Taxation System on Economic Growth in India
-Monika Ghotia ; Devender Kumar
Indian taxing system is one of the most important sources of revenue to the Government and at the same time one of the deciding parameter for economic growth. Whereas direct tax impacts directly the disposable income, the indirect tax impacts the prices of goods and services in the market. The basic objective of this article is to evaluate the impact of both direct and indirect taxes on economic growth of India. Today Indian taxing system is going a revolutionary change owing to spreading the wings of Indian business into global market. Indian Government is paying its full attention to liberalize the taxing system and at the same time closing the loopholes to disable the intruders to evade the taxing system so as to enlarge the revenue to Government exchequer and flourish the overall business scene. Broadly taxing system may be classified into three parts:
- Progressive taxation implies a taxing system where tax rate increases with increase in income, thus if a person has higher income, he will bear more tax burden due to increased tax rate than person having lesser income.
- Regressive taxation means a taxing system where tax rate reduces with increase in income and thus a person having lesser income faces lesser tax burden due to facing lesser tax rates.
- Proportion tax means a taxing system of charging tax on a fixed proportion irrespective of level of amount on which tax is to be levied. Thus, the same tax rate applies to different persons having different taxable amounts. Tax may be levied on natural persons like individual, Hindu undivided family artificial entities like Firm, association of persons, company, society etc. and also on goods and services. Thus, another classification of tax we found into direct tax and indirect tax.
- Direct tax means a type of tax which is paid by a person directly to the Government. For example income tax and wealth tax in India.
- Indirect tax means tax on goods and services which are paid by a person to the producer, seller or service provider who is liable to pay the same to the account of Government. For example customs duty, excise duty, VAT, service tax, entertainment tax etc. in India. Now a modern system of taxing all goods and services ― after introducing goods and services tax(GST), It replaced all existing enactments relating to goods and services.
Read More...
|
COMMERCE |
India |
154-156 |
43 |
IoT based Smart Agriculture
-Nagnath Haridas Mhetre ; Gaurav Rajendra Patil; Suraj Dinesh Patil; Swapnil Vitthal Rathod; Shekhar Mane
This paper introduces a Smart Agriculture System Using Arduino based on IOT. The idea behind this project to develop a product with help of internet to provide smartness in the farming system. This system uses arduino uno R3, temperature sensor, humidity sensor and soil moisture sensor and for data transferring the GSM module is used. We use the GSM module is used to establish a connection or communication link between the farmer and the field. The condition of the field will be send to the farmer through SMS via mobile application and this also displayed into the webpage. In this user can easily operate the system. This paper therefore proposes a system which is useful in monitoring the field data as well as controlling the field operations which provides the flexibility. It plays vital role in the growth of country s economy. It also provides large employment opportunities to the people. Read More...
|
Electronics and Telecommunication Engineering |
India |
157-159 |
44 |
IoT Based Multi-Room Music System
-Priyanka Dhotre ; Shubhangi Pawar; Aparna Potdar; Prof. Ashish Jadhav
This project is design of Internet of Things (IoT) based multi-room sound system using Raspberry pi. This project is intended to construct a multi-room sound system that uses any mobile device to control the music system. This multi-room music system is based on IoT. Music system is very exciting field when it uses new technologies like Internet of Things(IoT).Raspberry pi is credit card size computer. Raspberry pi supports large number of peripherals. It allows to control number of music simultaneously. Here local server is created on Raspberry pi. User required to use different mobile devices like smart phones, Laptops, Tablets to operate the multi-room sound with the help of UI created on web page. Read More...
|
Electronics and Telecommunication Engineering |
India |
161-162 |
45 |
Proximity Marketing using Android Application
-Disha Malusare ; Shipra Shetty; Vaishali Sanap; Amruta Kulkarni; Prarthana Nemade
Often people get confused while planning movies or shopping in malls or to plan which restaurants to visit. Firstly it becomes difficult for the people to visit each and every store todecide which is appropriate to fulfil their needs and requirements. Further, it is time consuming and may lead to disappointment and irritation. However, inventions of smart phones, tablets and computers have made our life easy and also they are very handy to use. And to solve this problem we can use a system which solves all the problems of the client. In this project, we have created an android application that is used by sending notifications about all the stores offers available in the shopping malls or food offers in restaurants or cafe or also movie and cinema snacks offers. Using this system people will not have to visit each and every store and can easily find out their needs and requirements and can plan it accordingly. Read More...
|
Computer Engineering |
India |
163-165 |
46 |
Fabrication of Self Propelled Tricycle
-Bharat N. Madankar ; Rakesh Shamrao Patil; Arvind Rameshwar Gabhane; Nilima Nandlal Tembhurkar; Anmol Ramteke
We all have seen the wheel chair that normally the patients or the handicapped people use, it needs someone to push or the person on the chair has to apply force directly on the wheels which make him tired and strained and if the patient want to go to the table he has to get down and shift to other chair. Thus to eliminate these problems of a patient or a handicapped person we have designed a three wheeled device. This tricycle relates to a portable self- propelled device without using either electric or fluid power. In some embodiments .it also helps to take a turn too easily than the normal wheelchair. It has a tiller pulling of which makes the tricycle to move forward and backward and it’s made so portable that the person using it can move independently in home and outdoor applications. Normal wheel chairs we find a paddle which is a more laborious job. In some other the person sitting on it must himself strive hard to move by rotating the wheels with his hands. Depending upon the lever pumped forward or reverse motion is obtained a modest back and forth pumping of the lever is sufficient to move the chair and occupant to easily keep up with friends another pedestrians. Mobility of physically disabled persons is a concerning social issue nowadays. Various hand driven tricycles, wheelchairs, retrofitted vehicles etc. are normally obtainable for disabled folks as a mode of transportation. The basic wheeled vehicle could be a machine style, pedalled by disabled persons within the aspect and seat within the middle for sitting arrangement. They use only one hand to steer the handle because other hand is used to rotate the pedal. Our aim is to design and fabricate a low cost tricycle for the handicap people to be propelled by the novel link mechanism attached to the steering column converting into cranking, using the advantage of leverage, with proper balance and distribution of mass and centre of gravity to crank the wheel shaft for propelling. As he can use both the hands on the steering, better control of the vehicle is ensured. Read More...
|
mechanical engineering |
India |
166-168 |
47 |
Advance Synchronization of Multiple Machines
-Rajakul SK ; Alamgir Sardar; Ikbal Hossain; Md Saddam Hossain; Prof. Juned Shaikh
In textile industry many processes required speed synchronization of more than one motors involved in the process. Speed control of motor is very important especially in the fields including industrial applications, robotics, textile mills, etc. In all these application motor speed synchronization is invigorate in conveyor belt driven by multiple motors. Sudden changes in load cause hunting and oscillatory behaviour in DC machine. This behaviour can be harmful to the process. There are so many methods which is used for controlling the DC machines. Among all these method master-slave synchronization is a widely used technique. So, speed control of DC motors at different load conditions is essential to achieve a robust system. The synchronization is done by using microcontroller chip which controls the master slave whose speed is followed by the other motors which all have to be synchronized. For PWM generation PIC microcontroller is used. The ADC is available in microcontroller chip which create feedback loop. This ADC checks the voltage level of the motor and accordingly the voltage level of the motor can be maintained at a fixed level. A driver circuit is used to drive the motor. Hence, a closed loop motor speed control circuit is designed and the total amount of power delivered to the motor is varied depending on load conditions. In this technique, the regulation of motors speed is achieved by changing the voltage of the motor which is adjusted by the duty cycle of PWM. Read More...
|
Electrical Engineering |
India |
169-171 |
48 |
Bike Sharing Android Application
-Suraj Sudhir Sawant ; Prajakta Swami; Sumant Singote; Mamta Dhone
In recent years, bike-sharing has experienced rapid development however, controversies about the externalities of bike-sharing programs have arisen as well. While bike-sharing programs have impacts on trafï¬c, the environment, and the social impacts, the management, and sustainable development of bike-sharing has also been of interest. Vehicle sharing systems are the key to sustainable mobility. Bike sharing need to possess adaptation features to answer the different user needs, and must be automated to avoid intermediaries between users and system the bike sharing application is only for the short term rides like in between the cities. Finally, Bike sharing must be based on a wide variety of vehicles and they based on sharing the rides. Pune is the city which having large number of two wheelers that is why we need to take advantage on them and make it simpler as other cab sharing applications. This application is more convenient to people for small rides between cities. Read More...
|
Computer Engineering |
India |
172-174 |
49 |
Seismic Analysis of Two Span Cable Stayed Bridge
-Vikash Singh ; Samreen Bano; Anand Kumar Yadav; Dr. Sabih Ahmad; Dr. Syed Aqeel Ahmad
The requirement of long span bridge is increase with development of infrastructure facility in every nation. Long span bridge could be achieved with use of high strength materials and innovative techniques for analysis of bridge. Generally, cable supported bridges comprise both suspension and cable-stayed bridge. Cable supported bridges are very flexible in behaviour. These flexible systems are susceptible to the dynamic effects of wind and earthquake loads. The cable-stayed bridge could provide more rigidity due to presence of tensed cable stays as a force resistance element. The cable bridge could assigned more span in the field of bridge. Seismic analysis of cable stayed bridge has been carried out by two different methods namely Response spectrum (RS) method and Time history method. Modelling of cable stayed bridge in SAP 2000 software is carried out and model is analysing by Response spectrum (RS) method and Time history method. Read More...
|
Civil Engineering |
India |
175-178 |
50 |
Privacy Preserving Personalized Data in Face Book by using Rank Based Algorithm
-G. Ashok Kumar Reddy ; Mr. S. Muni Kumar
Personalized recommendation is important to find relevant information to customers. It often relies on a large collection of user data, in particular users’ online activity on social media, to mine user preference. However, releasing such user activity data makes users vulnerable to inference attacks, as private data will often be inferred from the users’ activity data. In this, we proposed PrivRank, a customizable and continuous privacy-preserving social media data publishing framework protecting users against inference attacks while enabling personalized ranking-based recommendations. Its key idea is to continuously obfuscate user activity data such that the privacy leakage of user-specified private data is reduced under a given data distortion budget, which bounds the ranking loss incurred from the info obfuscation method in order to preserve the utility of the data for enabling recommendations In this , we plan to extend our framework by considering the data types with continuous values rather than discredited values, and explore further data utility beyond personalized recommendation. Read More...
|
Software Engineering |
India |
179-182 |