No. |
Title and Author |
Area |
Country |
Page |
251 |
Implementing the Eclectic Way of Writing Skill - Teachers Insight
-Divya. C ; Dr.Richard Robert Raa
In relation to teachers perception, this study investigates the implementation of the eclectic method of teaching writing skill. The design of the research was a descriptive qualitative. The subjects of this study were 3 teachers. A questionnaire was used in collect the data and teachers lesson plans as observing the credentials is a pure qualitative method based on the fundamental theory of. The present study revealed three findings. First, teachers have responded certainly to the items contained actions and materials used in the classroom. Therefore, they definitely perceived the accomplishment of eclectic method. Second, eclectic technique was realized in the planned activities the two target lesson plan. Third, there were some strengths and weakness realized from the responses to the questionnaire related to the implementing the approach. In conclusion, the current study could successfully achieve its goal in obtaining teachers insight towards the implementation of assorted method in teaching writing skill as well as describing its implementation through the level of lesson plans. The suggestions are proposed to teachers to attend some conferences related to teaching EFL, theory to have deeper knowledge about the original principles of the eclectic method to reflect their schooling in the genuine classroom. Read More...
|
Education |
India |
1002-1004 |
252 |
Automatic Transmission System
-Puneet Kumar Sharma ; Virendra Sangtani; Md. Asif Iqbal
Automatic control of the clutch is the key development in the improvement of electronic control and mechanical automatic transmission. A control course of action of Automatic clutch is analyzed which depends on the dynamic direct of the method of clutch responsibility and execution appraisal rundown of consolidated assessment. The control system of the clutch duty process is chosen and it is moreover applied to littler than expected cars. The hardware and programming of a little scope clutch automatic control system are arranged furthermore, realized. The system decreases the drivers work power satisfactorily and improves the vehicles idea of force starting and moving. Read More...
|
Electrical Engineering |
India |
1005-1009 |
253 |
Internet of Things: A Survey of Architecture and Security Issues
-Sivaranjani R ; Satheesh T
IoT is an interconnected network of heterogeneous devices where these devices communicate with each other. However various vulnerabilities are observed which shall keep IoT as a technology in danger. As a result, there are so many attacks on IoT have been invented before actual commercial implementation of it. This paper provides an overview of Internet of Things (IoT) with an architecture and security attacks. At scratch, it provides an horizontal overview of Iot, and followed by overview of technical details that pertain to the architecture followed by its requirements and its security issues. Read More...
|
Internet of things (IoT) |
India |
1010-1014 |
254 |
IoT Based Automatic Street Light Control and Fault Detection System
-M. Vasantha Lakshmi ; Y. Rajesh; S. Chandra Sekhar; S. Prabhu Kiran; R. Sai Mahesh
The conventional street lighting maintenance and control system still remains ancient in this era of revolution and technological advancement. The evolution of the Internet of Things (IoT) bring the revolutionary changes of the web world. Thus we use this technology to cater to the maintenance and control processes of street lighting system. The proposed system enables maintenance and control of the street lights and makes it easier to monitor and control its operation. The system will detect faults in the street lights to intimate the control room to take immediate action. It has the automatic fault detection and light sensing. It aims to design a system, which is free of any human intervention and provides quick maintenance functionality. In the current scenario, the street lights are automatically switched ON at every evening and is switched OFF the next morning. This project gives a solution for fast repairing and maximizes the ability to control the street lamps remotely and efficiently based on the weather conditions. Read More...
|
Internet of things (IoT) |
India |
1015-1017 |
255 |
Real-Time Vehicle Locking and Tracking System
-Reshmi H ; Bhavyadas D
The GPS/GSM Based System is one of the most important systems, which integrate both GSM and GPS technologies. It is necessary due to the many of applications of both GSM and GPS systems and the wide usage of them by millions of people throughout the world. This system designed for users in land construction and transport business, provides real-time information such as location, speed and expected arrival time of the user is moving vehicles in a concise and easy-to-read format. This system may also useful for communication process among the two points. Read More...
|
Electronics & Communication Engineering |
India |
1018-1020 |
256 |
A Study and Investigation of Waste Water Treatment by using Algae
-Mr. Rohit P. Deshmukh ; Dr. Arif Khan
In this research, we investigate the waste water treatment by using algae. As from our investigation, we know that the world is facing problems with a wide variety of pollutants and contaminates from various development activities. The population explosion in the world has resulted in an increase in the area of polluted water. The concern on the quantity and quality of waste generated and discharged into natural water bodies has recently indicated the need for different strategies address water quality challenges in the regions. So for that we have design a system is to grow freshwater algae in municipal waste water. In this the flexible plastic tubes that float in sea water and process of growing, the algae treat waste water and address environmental problems by consuming nutrients from wastewater and carbon dioxide. The nutrients, if left unconsumed, would otherwise be released into the costal waters contributing to undesired algae blooms. Depending upon the amount of sunlight, nutrients, water temperature and a few other environmental conditions algae can double their numbers every day and be ready to treat waste water in just three to five days. Read More...
|
Environmental Engineering |
India |
1021-1022 |
257 |
Industrial Bottle Filling Process Automation & Data Analytics Powered by Google AI
-Ahire Samratbhai Kailashrao ; Prof.P. G. Salunkhe
The Internet of Things (IoT) is propagating and blooming technology, in previous years. IoT is the collection of the sensor data through an embedded system and this embedded system uploads the data on the internet. There are many challenges to IoT and Industrial Automation for example Data and service security, Trust, data integrity, information privacy, scalability and interoperability Automation Domain Constraints. This project is mainly focused on developing an intelligent process controller which will completely replace the need of PLC in the factory. Being a sponsored project the requirement was to develop a system which will control and automate the Bottle filling operation in the factory, which will reduce the current limitations. Suitable components are researched to design the prototype. Main components needed are a microprocessor, temperature sensor, pressure sensor, and float sensor, analog to digital converter. To power the prototype, a normal 5V power supply is sufficient. Main components need to be calibrated to ensure the operation and precision of the prototype in its operation. As for the conclusion, although there are many problems and limitations faced, this system demonstrates successful process automation of bottle filling systems and indicates to change the filters if it is damaged. It also senses the workstation temperature. Read More...
|
Electronics and Telecommunication Engineering |
India |
1023-1026 |
258 |
Use of Ester Oil in Power Transformer & Its Various Characteristics Analysis with Convectional Mineral Oil
-Sandhi Aadilkhan Ahmedali ; Mr. Nilay Shah; Dr. Chirag parekh
I have planned to investigate the various characteristics like Dielectric, Overloading, Partial Discharge (PD) etc. of mineral oil and Ester oil filled power transformer. Mineral oil is the most commonly used insulating liquid for transformer applications, and an extensive database of knowledge has been accumulated over the years. Increased environmental, safety performance and economic have led to the consideration of other oils for use as transformer insulating fluids. Esters have been used as dielectric liquids since the invention of oil filled transformers in the late 1980s. Both types of oils tested are commercial products and commonly used in transformers. A Partial discharge (PD) is localized dielectric breakdown of a small portion of a solid or fluid electrical insulation (EI) system under high voltage (HV) stress. The discharge may occur at any point in the insulation system that the electric field strength exceeds the breakdown strength of that portion of the insulation system. In transformers, the insulation system is comprised of the winding insulation material as well as the dielectric fluid. PD can occur in a gaseous (i.e.SF6), liquid (Mineral Oil –Ester Oil) or solid insulating medium (Press board, Craft Paper, Insulation etc). Insulation failures begin with and are characterized by small but detectable releases of energy or Partial Discharge. That means partial discharges are the first indication of insulation breakdown. PD measurements can also provide information about ageing condition of transformers and thus enable conclusions about their lifetime. One of the main factory tests which used for assessing the insulation quality of power transformers is Partial Discharge test. The certainty of Partial Discharge (PD) measurement results can be affected by different factors such as materials used inside the transformer, Dielectric fluid, workmen ship during manufacturing process. The overload capability of Ester fluid is also remarkably higher compare to the mineral oil .An experimental study carried out on a real three phase Power Transformers at manufacturer high-tech test laboratory using modern test equipment . Dielectric tests were carried out on Power Transformer to understand Electrical Properties of Mineral oil and Ester Oil. Read More...
|
Electrical Power System |
India |
1027-1032 |
259 |
A Study on Kinematics of Gestures using Repetitive Neural Systems
-Dinesh T ; Dhiviyaa S; Aniesh M
With the quick improvement of science and innovation, human-PC cooperation is brought into the world all the more every now and again around us. Human movement investigation and acknowledgment dependent on frame of mind sensor is another field, which conquers numerous inadequacies and impediments of movement. By examining the kinematics of gestures, the highlights of gestures are separated and grouped utilizing Repetitive Neural Systems and their variation systems. Hand gesture acknowledgment framework has a decent consideration now days as a result of simple association among human and machine. The focal point of creating hand gesture is to make a superior correspondence among human and PC for passing on data. This paper introduces an overview on ongoing innovation of hand gesture acknowledgment both static and dynamic. Read More...
|
Artificial intelligence |
India |
1033-1035 |
260 |
The Development of a Plane From an Angular Vector
-Raubin kumar
The technique of developments of a plane from a precise vector in a rectangular arranges framework has been depicted. The technique for making of a rakish vector from two rectilinear vectors has been thought of. The property of uniformity of precise vectors has been depicted. Read More...
|
Mathematics |
India |
1036-1040 |