Combined Utilisation of Ground Granulated Blast Furnace Slag and Copper Slag in M30 Grade Concrete: Effect on Workability, Compressive Strength and Flexural Strength |
Author(s): |
| Rajesh Gupta , Oriental Institute of Science & Technology, Bhopal (M.P.) 462021, India; S.K. Diwan, Department of Civil Engineering, Oriental Institute of Science & Technology, Bhopal (M.P.) 462021, India |
Keywords: |
| GGBS; Copper Slag; Partial Replacement; M30 Concrete; Compressive Strength; Flexural Strength; Sustainable Concrete |
Abstract |
|
River sand extraction is causing serious environmental damage, while cement production contributes a large share of global anthropogenic COâ‚‚ emissions. This study examines the use of two industrial by-products, ground granulated blast furnace slag (GGBS) as a partial replacement of cement and copper slag (CS) as a partial replacement of natural fine aggregate, in M30 grade concrete designed according to IS 10262. GGBS was used at 0, 5, 10, 15 and 20% by weight of cement, and copper slag at 0, 10, 20, 30, 40 and 50% by weight of sand. Workability was measured by the slump test, compressive strength at 7, 14 and 28 days, and flexural strength at 28 days. Slump decreased from 74 mm to 64 mm as GGBS increased to 20%, and increased from 74 mm to 84 mm as copper slag increased to 50%. The optimum GGBS content was 10%, giving a 28-day compressive strength of 37.20 MPa (2.2% above the control) and a flexural strength of 4.21 MPa (7.9% above the control). For copper slag, the 28-day compressive strength peaked at 30% replacement (39.94 MPa, +9.7%) and the flexural strength peaked at 40% (4.68 MPa, +20.0%); strength fell below the control at 50%. A combined mix with 10% GGBS and 40% copper slag reached a 28-day compressive strength of 37.10 MPa. The results show that both by-products can be used in structural-grade concrete at moderate replacement levels, reducing both cement consumption and river sand demand. |
Other Details |
|
Paper ID: IJSRDV14I90071 Published in: Volume : 14, Issue : 9 Publication Date: 01/12/2026 Page(s): 156-160 |
Article Preview |
|
|
|
|
