High Impact Factor : 4.396 icon | Submit Manuscript Online icon |

Study on Behavior of Flyash based Geopolymer Concrete Incorporated with M sand and Bottom Ash

Author(s):

Priti Vanjare , SSJCET, Asangaon, Thane, MH ; Dr.M.S.kuttimarks, SSJCET, Asangaon, Thane, MH ; R. Mahadev Swamy, SSJCET, Asangaon, Thane, MH

Keywords:

Global Warming, Alkaline Activators, Eco-Friendly Concrete, M-Sand and Bottom Ash

Abstract

In the modern era, global warming becomes a critical environmental issue. Each passing year, the amount of green house gas emission to the atmosphere is in an increasing trend. Carbon dioxide (CO2) remains the ace green house gas which cause significant influence on global warming. CO2 contributes about 82% of the total green house gas emission. Cement industries are one of the major emitters of CO2. India is the world's second-largest cement producer next to China to reduce the utilisation of cement in concrete. In the prospects and perspectives of waste reutilization and eco-sustainable concrete production, the feasibility of total replacement of cement with fly ash and partial replacement of natural river sand with M-Sand (manufactured sand) in geo-polymer concrete was investigated in this research. Usage of this type of concrete can reduce the usage of cement and also the CO2 emission. Variations in compressive strength of geopolymer concrete with respect to various molarities of alkaline activators were studied. The optimal molarity ratio was identified as 12M and the optimum molarity ratio was kept constant for partial replacement of river sand with M-Sand. It was observed that better compressive strength (7 and 28 days) was attained for the eco-friendly concrete upto 40% replacement of river sand with M-Sand. Further more with 40% replacement of M.sand for river sand as constant, partial replacement of bottom ash for river sand at 40% was found to be optimum. The strengths of concrete are considered as the key factors for quality assurance of concrete. In this research a data driven model, Utilization of industrial by-products as aggregate in concrete becomes current need of the hour owing to its environmental importance. The ANN model was developed using experimental data and the data gathered from the past research literature. Totally 70 set of data's were used for ANN modelling, 80% in the training phase, and 10% in the testing phase and remaining 10% for validation phase. To develop the model, 8 input parameters namely fly ash, sodium hydroxide, sodium silicate, M-Sand, bottom ash, water, river sand and coarse aggregate were used to attain three output parameters. Compressive, flexural and split tensile strength of geopolymer concrete containing M-Sand and bottom ash was considered as output for respective neural network model. The results obtained in the training, testing and validation phases strongly show the potential use of ANN to predict 28 days compressive strength, split tensile strength and flexural strength of geopolymer concrete containing M-Sand and bottom ash.

Other Details

Paper ID: IJSRDV14I90082
Published in: Volume : 14, Issue : 9
Publication Date: 01/12/2026
Page(s): 182-191

Article Preview

Download Article