Catalytic Converter Made of Non-noble Material for an Automobile |
Author(s): |
| Diptesh Patel , Shankersinh Vaghela Bapu Institute of Technology (GTU), Gandhinagar, Gujarat, INDIA; Nikit B. Patel, Shankersinh Vaghela Bapu Institute of Technology (GTU), Gandhinagar, Gujarat, INDIA; Saurabh B. Patel, Shankersinh Vaghela Bapu Institute of Technology (GTU), Gandhinagar, Gujarat, INDIA; Milan S. Patel, Shankersinh Vaghela Bapu Institute of Technology (GTU), Gandhinagar, Gujarat, INDIA |
Keywords: |
| catalytic converter, non-noble material. |
Abstract |
|
This paper is reports on the review of catalytic converter made of non - noble material for an automobile. The converter made of the noble material is highly efficient but there is some major problem associated with these converters. First problem is the cost of the catalytic converter increased due to high cost of the noble material. Second problem is that they are operated at the higher temperature. Third problem is that the noble material is rarely available in earth crust and hence they are exhausted one day. Due to above problem associated with the noble material there is some option required for the noble material which is easily available at the lower cost. The non - noble material (Copper, Nickel, Zinc etc.) is perfect for the use into the catalytic converter instead of the noble material as they are easily available at low cost and operated at lower temperature than the noble material. |
Other Details |
|
Paper ID: IJSRDV1I9035 Published in: Volume : 1, Issue : 9 Publication Date: 01/12/2013 Page(s): 1825-1827 |
Article Preview |
|
|
|
|
