Strength Characteristics of Concrete with Sintered Fly Ash Aggregate

This paper gives a research on Sintered fly ash. Which is a waste material of coal firing Thermal power plants (TPPs) and its accumulation near power plant . The sintered fly ash is procuder from Gallantt group of industries .This industries is located near Sector-23, GIDA Sahjanwa city in Gorakhpur district in Uttar Pradesh state. The plant is an establishment of 14th November, 2006 .It has a generation capacity of 25 MW. These theses explain the various utilization of sintered fly ash and its ordinary Portland cement and properties in concretecauses severe pollution problems. Its utilization as a raw material for cube (Brick) making will be a very usefully solution in our economical and environmental aspects. Ordinary Portland cement (OPC) namely: 33, 43 and 53 which are commonly used in construction industry.This research paper in use of the Ordinary Portland cement (OPC) 43grade and use the sintered fly ash many percentage 5%, 10% ,15%, and 20% remove the aggregate. The high emission of CO2 from cement industry, steel plants, waste products from the thermal plants for the generation of electric power to meet the demand of growing population resulted in the production of 70 million tons of coal ash per year from burning about 200 million tons of coal per year for electric power generation .This research paper explain the various utilization of sintered fly ash and its ordinary Portland cement and properties in concrete.