Study of Connecting Rod to the Shank Sectional Area Reduction of variable Cross Section by using Finite Element Method |
Author(s): |
| Arvind Dave , Laxmi narayan college of technology; Rana Manoj Mourya, Laxmi narayan college of technology; Dr.V.N Bartariya, Laxmi narayan college of technology |
Keywords: |
| Connecting Rod, Buckling, Manufacturing of Connecting Rod |
Abstract |
|
A connecting rod is a engine member which is subjected to alternating direct compressive and tensile forces. Since the compressive forces are much higher than the tensile force, therefore the cross-section of the connecting rod is designed as a different cross section and the rankine formula is used. A connecting rod subjected to a cyclic as well as axial load W may buckle with x-axis as neutral axis in the plane of rotation of the connecting rod, or y-axis is a neutral axis. The connecting rod is considered like both ends hinged for buckling about x-axis and one end is fixed and other end load is applied for buckling about y-axis. A connecting rod should be equally strong in buckling about either axis. |
Other Details |
|
Paper ID: IJSRDV3I2296 Published in: Volume : 3, Issue : 2 Publication Date: 01/05/2015 Page(s): 371-376 |
Article Preview |
|
|
|
|
