Design, Analysis and Fabrication of Driving Wheel to Be used in Disc Conveyor Underground Unit |
Author(s): |
| Ashwamegh Patil , VIDARBHA INSTITUTE OF TECHNOLOGY UMRER ROAD NAGPUR; Dr. Achal Shahare, VIDARBHA INSTITUTE OF TECHNOLOGY UMRER ROAD NAGPUR |
Keywords: |
| CAD 3D Modeling, Weldment Wheel Design |
Abstract |
|
Driving wheel design considerations generally taken for drive unit made for disc conveyor in multiple applications. To run the conveyor this driving sprocket type concept is taken and which forms standardized wheel with proper selection to overcome on the rotary driving application .This will be only for specific use in disc conveyor only not compatible with other types of conveyors. Driving wheel arrangement is designed and validate with applying its all boundary conditions. Comparison is to be done with all possible geometric structure while designing the wheel which can be effective in costing and manufacturability also. Driving wheel validation will be carried out with working stress and deflection occurs while rotating and pulling the conveyor. |
Other Details |
|
Paper ID: IJSRDV3I2914 Published in: Volume : 3, Issue : 2 Publication Date: 01/05/2015 Page(s): 1321-1324 |
Article Preview |
|
|
|
|
