Experimental Study on Composite Sandwich Panels with Concrete and Corrugated Steel Faces |
Author(s): |
| Vinoth Kumar K , VALLIAMMAI ENGINEERING COLLEGE; Kavitha A, VALLIAMMAI ENGINEERING COLLEGE |
Keywords: |
| Sandwich panel, Composite panel, Profile decking, Corrugated steel |
Abstract |
|
This paper dealt with experimental investigation on composite sandwich panel. Sandwich composite panel consists of three layers of two different materials (Concrete and steel). Concrete is sandwiched between steel layers (i.e a 1 mm thick plain cold-rolled sheet on top and corrugated sheet underneath concrete layer). Panel dimension is of 650mm wide, 100mm high and 1250mm long (One Way Distribution). Six numbers of panels were casted of which three from each Reinforced concrete panel and Composite Sandwich panel. Embossment of seven numbers was provided in corrugation and 10mm diameter eight number of shear stud required to connect plain Cold Rolled sheet and corrugation layer. Behaviour of sandwich panel as well as RC Panel was tested under Four-point loading setup. Test results and failure pattern of both panels were compared with one another. |
Other Details |
|
Paper ID: IJSRDV4I11107 Published in: Volume : 4, Issue : 1 Publication Date: 01/04/2016 Page(s): 939-942 |
Article Preview |
|
|
|
|
