BTS Cell Site Security And Fault Detection

The base station situated near the mobile tower plays an important role. But, at present situation some problems are being faced by the BTS cell. Some of the problems include theft of copper wires, unauthorized entry in the cell, variation in temperature, generator fuel being unnoticed, and the time management of technicians and vendors in case of above stated problems. In the project BTS cell site security and fault detection safety measures are taken to solve above problems. This method uses GSM module which will send immediate message about each and every activity happening at the site. Various sensors are used such as temperature sensor to sense the temperature of the room and if the temperature rises above threshold value, the module will send the message to master mobile which is set in the module. The fuel level sensor is used for sensing the diesel level of the generator. PIR sensor is used for sensing the motion in the system. Door open and close sensor is used for opening and closing the door. In addition to safety the RFID reader is used for accessing the site door. CCTV camera is used for surveillance the site area. This method improves operating efficiency of the site, the delay can be reduced, and it also reduces fuel consumption. This project gives solution to controls and monitors the remote area and enables the area to work effectively. This system does not do any changes in present system just add extra features to improve security.