Design and Fabrication of Can Crusher |
Author(s): |
| Ghanshyam Ingle , Prof. Ram Meghe Institute of Technology and Research, Badnera; M. P. Nawathe, Prof. Ram Meghe Institute of Technology and Research, Badnera; Sneha Pradhan, Prof. Ram Meghe Institute of Technology and Research, Badnera; Pranjali Kharode, Prof. Ram Meghe Institute of Technology and Research, Badnera; Dnyaneshwar Rathod, Prof. Ram Meghe Institute of Technology and Research, Badnera |
Keywords: |
| Can Crusher, Toggle Mechanism |
Abstract |
|
The purpose of this project is to make such a mechanical oriented project to reduce the scrap volume and use it for recycle purpose properly. It will help to keep earth neat and clean. There is wide use of cans for food packaging and for storage it requires large storage at hotels, canteens and many public places. This project involves processes like design, fabrication, and assembling process. There are manual can crusher based on simple slider crank mechanism but in this project the toggle mechanism is used to crush the can. It will reduce the scrap volume as well as transportation cost by reducing volume. After all process had been done, this crusher may help us to understand the fabrication and designing process that involve in this project. |
Other Details |
|
Paper ID: IJSRDV6I10321 Published in: Volume : 6, Issue : 1 Publication Date: 01/04/2018 Page(s): 445-448 |
Article Preview |
|
|
|
|
