Design of Cold Rolling Machine for Controlling Strip Thickness |
Author(s): |
| Prasad Bhagwat , SANGHAVI COLLEGE OF ENGINEERING NASHIK; Yashwant Donge, SANGHAVI COLLEGE OF ENGINEERING NASHIK; Sachin Kadam, SANGHAVI COLLEGE OF ENGINEERING NASHIK; GAURAV PAGAR, SANGHAVI COLLEGE OF ENGINEERING NASHIK; Santosh Khalkar, SANGHAVI COLLEGE OF ENGINEERING NASHIK |
Keywords: |
| Gears, Bearing, Gearbox, Cold rolling, Rollers |
Abstract |
|
A rolling process is process in which metal is pass through the pair of revolving rolls. The thickness of metal reduces when the metal comes in the contact with the two rolls. There are two types of rolling operation: - Hot rolling and cold rolling, both process is used for uniform thickness reduction. Most metal rolling operations are similar in that the work material is plastically deformed by compressive forces between two constantly spinning rolls. These forces act to reduce the thickness of the metal and affect its grain structure. The present work involves the design of machine operating on cold rolling process, to control the strip thickness as per the requirements. |
Other Details |
|
Paper ID: IJSRDV6I10401 Published in: Volume : 6, Issue : 1 Publication Date: 01/04/2018 Page(s): 949-950 |
Article Preview |
|
|
|
|
