Strength Testing on Wood by Box Transfer Conveyor by using Four bar Mechanism with Cam Operated Hammer

Strength test of wood metal that also called of destructive test, continuous demand for alternative movement of boxes in the production plants exists from the dawn of the industrial revolution. The prime objective of this activity is to design a mechanism that gives this intermittent motion using the mechanical links. The benefits of this system is used to in a industry production line continuous testing of wood pieces and using some solenoid operated valve and also a pneumatic supply used in the operation of hammer control In movements.in the case of general conveyor mechanisms these actions cannot be performed if robotic module is applied to produce stop and move motion stopping of the belt which is basically costly. This four bar chain mechanism design model requires 24V electric motor shafts and frame where the frame and construction fully in common MS(mild steel) and test piece is wood, then cam operating purpose of solenoid valve, pneumatic supply, this system is habitual to move as heavy packages as 6 to 10KGs approximately. And also strength test range of 100N, the main use of this system is continuous testing in production lines.