Smart Load Control System of Bus using Embedded Technology |
Author(s): |
| S. Siddeshwar , Valliammai Engineering College; G. Shanmuga Sunder, Valliammai Engineering College; M. Rahul Kanna, Valliammai Engineering College; T. Tamilselvan, Valliammai Engineering College |
Keywords: |
| Smart Load Control System, GSM Module, PIR Sensor |
Abstract |
|
Aiming to implement a module in bus in order to prevent overload and footboard travel. Here, the doors of the vehicle is attached to two PIR sensor which detects motion of the passengers at bus stop as well as inside the bus (Near Footboard). The sensor output is connected to a DC Motor which activates the door. If the door is activated, then the module checks the output from the load cell. If the output of the load cell value is acceptable, then the engine is set to on. Otherwise, it remains in off condition. If the vehicle is detected as overloaded, SMS will be sent to the user. To send SMS a GSM module is connected to the microcontroller. This module ensures stability and accountability of the vehicle. With this module we can ensure that no one standing in the footboard and the vehicle is not overloaded. Also it supports automatic door. Here a relay is used to open and close the door manually. |
Other Details |
|
Paper ID: IJSRDV6I20718 Published in: Volume : 6, Issue : 2 Publication Date: 01/05/2018 Page(s): 1066-1068 |
Article Preview |
|
|
|
|
