Replacement of Conventional Contactor using Power Device and Wireless Control |
Author(s): |
| Maheta Kuldeep U. , DR. SUBHASH TECHNICAL CAMPUS; Mori Hiren K., DR. SUBHASH TECHNICAL CAMPUS; Barad Mitesh J., DR. SUBHASH TECHNICAL CAMPUS; Dodiya Mahipat A., DR. SUBHASH TECHNICAL CAMPUS; Prof. Jaydip Zala, DR. SUBHASH TECHNICAL CAMPUS |
Keywords: |
| Contactor, Bluetooth Module, Arduino UNO, Using Triac, Opto Coupler |
Abstract |
|
Contactor is required in industrial applications, particularly for switching large lighting loads and motors. A contactor is an electrically controlled switch used for switching an electrical power circuit through the magnetizing and demagnetizing process. A contactor is controlling by a circuit which has a much lower power level than the switched circuit. Without requiring contact protection the occurrence of electric current arcing causes significant degradation of the contacts, which suffer significant damage. An electrical arc occurs between the two contact points when they transition from a closed to an open or from an open to a closed. The break arc is typically more energetic and thus more destructive. We solve this or some other problem which is coming in conventional contactor by replacing it with an electronic circuit which is made by power devices. |
Other Details |
|
Paper ID: IJSRDV6I21979 Published in: Volume : 6, Issue : 2 Publication Date: 01/05/2018 Page(s): 3499-3501 |
Article Preview |
|
|
|
|
