Remote Process Monitoring and Control

A conventional method for monitoring and controlling various industrial/automobile processes parameters such as temperature, water level, etc is on site. There is no provision for monitoring and controlling such a parameter centralized from a remote location. The proposed work aims at overcoming this limitation of the existing system. In this project these parameters will be monitored and controlled remotely. There will be GUI provision on server PC. The most Crucial and Vital part of this project will be MOD and Wi-Fi module interface. In industries/automobile the MOD communication protocol is preferred over all other communication protocols. The reason behind this is the various features and efficiency provided by MOD which is very much suitable for industrial/automobile working environment. In the proposed project, there are two process units whose parameters are to be monitored and controlled. The control will be ON/OFF control. The desired values of all the parameters are stored in processor. The process unit will monitor the process and observe the parameter values. These observed values are compared with predefined set values which are stored in the processor. The observed and set values both are displayed on LCD simultaneously. The information is send to the master unit using MOD interface. This communication is wired communication and bidirectional one. Wi-Fi interface is used to send information to the server unit. This communication is wireless and bidirectional. The control will be done by process unit. In this project 8051 microcontroller for process unit and controller based on ARM7 core for master unit is used.