Real Time Electrical Parameter Monitoring and Protection System for Transformer

The main aim of the project is to accumulate time period knowledge of transformer remotely over the net falling underneath the class of web of Things (IOT). For this time period side, we have a tendency to take one temperature sensing element, one potential transformer and one current transformer for observation Temperature, Voltage, and Current knowledge of the transformer and so send them to a distant location. These 3 Associate in Nursing along values are taken in multiplexing mode and connected to microcontroller ATmega328p families through an ADC 0808. they are then sent on to a Wi-Fi module underneath transmission control protocol science protocol to a fervent science that shows the information in real- time chart kind in any net connected computer / portable computer for display in three completely different charts. So, this transformer Health measurement can facilitate to spot or acknowledge sudden things before any serious failure those results in a larger responsibility and vital value savings. A recent Brobdingn again interest in Machine to Machine communication is thought because the web of Things (IOT), to permit the chance for autonomous devices to use web for exchanging the information. This work presents style and execution of real time observation and fault detection of transformer and record key operation indictors of a dispersion transformer like load current, voltage, transformer oil and encompassing temperatures and wetness. they need to seem at it incessantly by mistreatment this project it will minimize operating efforts and improve accuracy, stability, potency during this project, sensors are wont to sense the most parameters of apparatus like voltage, current(over voltage, under voltage, over current) this detected knowledge is distributed to microcontroller and this controller checks parameter limits that more send to the IOT net server thingspeak website package mistreatment Wi-Fi module of those knowledge creates positive the correct info is in hand to the operator and operator will make helpful choices before any ruinous failure on basis of that knowledge of parameters.