Modeling of Elastic Ring for Artery using COMSOL Multiphysics |
Author(s): |
| Soundarya M , Vidya Vikas Institute of Engineering and Technology; Thanmayi L, Vidya Vikas Institute of Engineering and Technology; Gowtham N, Vidya Vikas Institute of Engineering and Technology; Muzammil Pasha, Vidya Vikas Institute of Engineering and Technology; Namratha Dcruz, Vidya Vikas Institute of Engineering and Technology |
Keywords: |
| MEMS, COMSOL Multiphysics, HARM |
Abstract |
|
Microelectromechanical System (MEMS) is a technology defined as miniaturized mechanical and electromechanical elements in micro meter scale that are made using the techniques of micro fabrication. MEMS devices are generally in the range of 100mm to 10 nm. It is the combination of mechanical and electrical functions on the same chip. This MEMS model explains the use of a model to design an implanted blood pressure monitoring system through simulations in COMSOL Multiphysics. This measurement system needs to have a minimal blood contact to reduce the thrombus formation, bleeding and avoid vessel occlusion, which are associated with conventional catheter-tip-based technique. The model employs an elastic sensing cuff, wrapped around the artery section, made of silicone filed with bio-compatible fluid with an immersed MEMS pressure sensor. |
Other Details |
|
Paper ID: IJSRDV7I30961 Published in: Volume : 7, Issue : 3 Publication Date: 01/06/2019 Page(s): 1744-1746 |
Article Preview |
|
|
|
|
