Design and Development Lift Without Electricity

The design and construction of an elevator. Elevator is a device that efficiently moves in building, vessel, or other structures. They are generally powered by electric motors that either drive traction cables or counterweight systems like a hoist, or pump hydraulic fluid, or raise a cylindrical piston in the form of a jack. During the industrial era, the development of elevators was led by the need for movement of raw materials including coal and lumber from the hillsides. The technology developed by these industries and the introduction of steel beam construction worked together to provide the passengers freight elevators in use today. The construction and installation of other systems of elevator in existence are quite expensive compared to the conventional system. In This Project work we are aimed to developing an elevator that does not use and electricity or any hydraulic system but more to the conventional system in order to save cost in construction, installation and maintenance. No electricity is the main objective work in the elevator process. In our day to day life we use conventional Lift which works on conventional energy mainly on electricity which is our daily source for travelling inside a building. But in village areas electricity is not present continuously. Also for People leaving in economic class society cannot afford lift in their society due to its bill and maintenance. Hence we have design a non-conventional lift. The lift, which can work without electricity by using several mechanisms. This type of system is just to eliminate electricity.