Dynamic Automatic Adjusting Suspension System

Suspension system adjust the suspension of an automobile to adapt to bumps or potholes that are encountered in the road as the vehicle is driving. These system have the potential to improve safety, performance and ride comfort in automobiles. An integral part of suspension system is a device to detect irregularities in the road current detection system that are available lack either in precision, resolution or speed. A senior design project, dynamic automatic adjusting suspension system (daas).development of the dynamic automatic adjusting suspension system totally new design and road profile sensor (rps).the road profile sensor was implemented through the design of a range finder that uses a lidar sensor with a laser to measure distance. The distance from the sensor to the road changes as irregularities in the road are encountered, and this change in distance is measured by the road profile sensor to determine the size if the irregularities. Vehicle have suspension components that help to isolate the chassis of the vehicle from the road over which it travels. This is accomplished by placing a spring and damper system between the wheels and the chassis if the vehicle. The suspension components are chosen to optimize the automobiles handling on flat ground with minor irregularities and do not handle large bumps well. Common automobiles drive very poorly in rough situation .a vehicle that is roads much better, but will not handle as well as high speeds or in sharp corners where stiffer suspension improves performance.