Dynamic Analysis of Grid and Flat Slab for Long Span Building

Design needs to have good hand on numerical problem, to counter different challenges while getting twisted in a design. After complete knowledge of analysis and design one can design any structure but it is not possible for a single person to go through all fields. It is necessary to get a full knowledge in a particular field. Building analysis and design needs complete knowledge of IS Codes and numerical analysis. One must be well versed about loading which are considered in a building. Building can be of various types and can be residential, commercial, industrial and institutional. So, while performing a design we need to go through different design codes. Some of the codes are given below with their description of loading. IS- 875 (Part 1) – Design Code for Dead Load. IS- 875 (Part 2) – Design Code for Live Loads. IS- 875 (Part 3) – Wind Load Design Code. IS- 1893 – Earthquake Design Code. In addition to above codes we have other codes too to take proper loading and to follow the steps as per standard code recommendation. Engineers which are dealing with Analysis and Design of Structures are known as Structural Design Engineers. They are professional in design both by manual process and by software means. But there is a question that which method we must choose while designing nowadays. It is not as easy as it looks to design a problem it needs mathematical calculation and practice in that field. With this specialization one must have good hand on numerical calculation and must have good experience as well.